following procedures were implemented during production (see notes). Before beginning the work, please road test the vehicle to isolate the area
where the noise is coming from. Then refer to the technical bulletin for assistance. After completing the work, road test the vehicle again to confirm
the noise was eliminated. Apart from the complaints listed and the relevant remedy, other causes of noise may occur in the door trim panels. It will
be necessary to seek out these causes and systematically eliminate them on your own.
Parts Information:
Work Procedure:
Refer to figure 1 for the parts overview. In order to remedy noises in the door/door panel, the following items must first be removed only if
necessary.
Part to be removed. Notes for disassembly:
Door panel (left or right). 1. Disconnect and cover battery terminal first. See warning.
2. Caution! The bowden cable can be damaged if bent in the area of the hook. On vehicles with the new style bowden cable, push the hook into
the end piece of the cover after disassembly.
