Showing posts with label CCC(R) - Radio Continues to Play After Ignition OFF. Show all posts
Showing posts with label CCC(R) - Radio Continues to Play After Ignition OFF. Show all posts

Saturday, 17 November 2018

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 654606 Date: 110401


CCC(R) - Radio Continues to Play After Ignition OFF



SI B65 46 06



Audio, Navigation, Monitors, Alarms, SRS



April 2011



Technical Service



This Service Information bulletin supersedes SI B65 46 06 dated May 2007.



[NEW] designates changes to this revision



SUBJECT



CCC: Radio Continues to Play After Ignition Off



MODEL



E90, E91, E92, E93 (3 Series) with CCC-Navigation (SA 609)



E60, E61 (5 Series) with CCC-Navigation (SA 609)



E63, E64 (6 Series)



E70 (X5) with CCC-Navigation (SA 609)



SITUATION



The customer states the radio continues to play even after the ignition is off.



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 230



CAUSE



CCC (Car Communication Computer) software



PROCEDURE



1. Check whether aftermarket equipment has been retrofitted to the MOST on the vehicle. This includes TCU, CDC, IPOD, etc. If so, check for a



correct wiring connection of terminal 15 and terminal 30. If these 2 terminals are swapped, the above situation may occur. Correct as needed.



Note:



Repairs related to the installation of use of or removal of any aftermarket components are not covered under warranty.



If aftermarket equipment is installed and operating correctly, proceed to the next step.



2. For vehicles with software older than integration level E060-05-09-520 or E89x-05-09-520, program the vehicle using the current version of



ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Business Development & Marketing Portal / Service



Operations / Workshop Technology / Vehicle Programming.



3. For vehicles manufactured since 9/2006 or programmed to integration level E060-05-09-520, E89x-05-09-520 or later, check whether the vehicle



is equipped with Comfort Access (SA 322). Rule out whether the vehicle is unintentionally left locked or unlocked with terminal R or terminal 15



on. Refer to SI B65 04 06 for more information.



[NEW] WARRANTY INFORMATION

Friday, 16 November 2018

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) DIAGNOSIS AND REPAIR, MAINTENANCE, DIAGNOSIS AND Technical Service Bulletin # 654606 Date: 110401


CCC(R) - Radio Continues to Play After Ignition OFF



SI B65 46 06



Audio, Navigation, Monitors, Alarms, SRS



April 2011



Technical Service



This Service Information bulletin supersedes SI B65 46 06 dated May 2007.



[NEW] designates changes to this revision



SUBJECT



CCC: Radio Continues to Play After Ignition Off



MODEL



E90, E91, E92, E93 (3 Series) with CCC-Navigation (SA 609)



E60, E61 (5 Series) with CCC-Navigation (SA 609)



E63, E64 (6 Series)



E70 (X5) with CCC-Navigation (SA 609)



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 162



SITUATION



The customer states the radio continues to play even after the ignition is off.



CAUSE



CCC (Car Communication Computer) software



PROCEDURE



1. Check whether aftermarket equipment has been retrofitted to the MOST on the vehicle. This includes TCU, CDC, IPOD, etc. If so, check for a



correct wiring connection of terminal 15 and terminal 30. If these 2 terminals are swapped, the above situation may occur. Correct as needed.



Note:



Repairs related to the installation of use of or removal of any aftermarket components are not covered under warranty.



If aftermarket equipment is installed and operating correctly, proceed to the next step.



2. For vehicles with software older than integration level E060-05-09-520 or E89x-05-09-520, program the vehicle using the current version of



ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Business Development & Marketing Portal / Service



Operations / Workshop Technology / Vehicle Programming.



3. For vehicles manufactured since 9/2006 or programmed to integration level E060-05-09-520, E89x-05-09-520 or later, check whether the vehicle



is equipped with Comfort Access (SA 322). Rule out whether the vehicle is unintentionally left locked or unlocked with terminal R or terminal 15



on. Refer to SI B65 04 06 for more information.



[NEW] WARRANTY INFORMATION

Tuesday, 6 November 2018

CCC(R) - Radio Continues to Play After Ignition OFF

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 654606 Date: 110401



CCC(R) - Radio Continues to Play After Ignition OFF



SI B65 46 06



Audio, Navigation, Monitors, Alarms, SRS



April 2011



Technical Service



This Service Information bulletin supersedes SI B65 46 06 dated May 2007.



[NEW] designates changes to this revision



SUBJECT



CCC: Radio Continues to Play After Ignition Off



MODEL



E90, E91, E92, E93 (3 Series) with CCC-Navigation (SA 609)



E60, E61 (5 Series) with CCC-Navigation (SA 609)



E63, E64 (6 Series)



E70 (X5) with CCC-Navigation (SA 609)



SITUATION



The customer states the radio continues to play even after the ignition is off.



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 184



CAUSE



CCC (Car Communication Computer) software



PROCEDURE



1. Check whether aftermarket equipment has been retrofitted to the MOST on the vehicle. This includes TCU, CDC, IPOD, etc. If so, check for a



correct wiring connection of terminal 15 and terminal 30. If these 2 terminals are swapped, the above situation may occur. Correct as needed.



Note:



Repairs related to the installation of use of or removal of any aftermarket components are not covered under warranty.



If aftermarket equipment is installed and operating correctly, proceed to the next step.



2. For vehicles with software older than integration level E060-05-09-520 or E89x-05-09-520, program the vehicle using the current version of



ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Business Development & Marketing Portal / Service



Operations / Workshop Technology / Vehicle Programming.



3. For vehicles manufactured since 9/2006 or programmed to integration level E060-05-09-520, E89x-05-09-520 or later, check whether the vehicle



is equipped with Comfort Access (SA 322). Rule out whether the vehicle is unintentionally left locked or unlocked with terminal R or terminal 15



on. Refer to SI B65 04 06 for more information.



[NEW] WARRANTY INFORMATION

Sunday, 28 October 2018

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 654606 Date: 110401


CCC(R) - Radio Continues to Play After Ignition OFF



SI B65 46 06



Audio, Navigation, Monitors, Alarms, SRS



April 2011



Technical Service



This Service Information bulletin supersedes SI B65 46 06 dated May 2007.



[NEW] designates changes to this revision



SUBJECT



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 130



CCC: Radio Continues to Play After Ignition Off



MODEL



E90, E91, E92, E93 (3 Series) with CCC-Navigation (SA 609)



E60, E61 (5 Series) with CCC-Navigation (SA 609)



E63, E64 (6 Series)



E70 (X5) with CCC-Navigation (SA 609)



SITUATION



The customer states the radio continues to play even after the ignition is off.



CAUSE



CCC (Car Communication Computer) software



PROCEDURE



1. Check whether aftermarket equipment has been retrofitted to the MOST on the vehicle. This includes TCU, CDC, IPOD, etc. If so, check for a



correct wiring connection of terminal 15 and terminal 30. If these 2 terminals are swapped, the above situation may occur. Correct as needed.



Note:



Repairs related to the installation of use of or removal of any aftermarket components are not covered under warranty.



If aftermarket equipment is installed and operating correctly, proceed to the next step.



2. For vehicles with software older than integration level E060-05-09-520 or E89x-05-09-520, program the vehicle using the current version of



ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Business Development & Marketing Portal / Service



Operations / Workshop Technology / Vehicle Programming.



3. For vehicles manufactured since 9/2006 or programmed to integration level E060-05-09-520, E89x-05-09-520 or later, check whether the vehicle



is equipped with Comfort Access (SA 322). Rule out whether the vehicle is unintentionally left locked or unlocked with terminal R or terminal 15



on. Refer to SI B65 04 06 for more information.



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 131



[NEW] WARRANTY INFORMATION

Thursday, 25 October 2018

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 654606 Date: 110401


CCC(R) - Radio Continues to Play After Ignition OFF



SI B65 46 06



Audio, Navigation, Monitors, Alarms, SRS



April 2011



Technical Service



This Service Information bulletin supersedes SI B65 46 06 dated May 2007.



[NEW] designates changes to this revision



SUBJECT



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 116



CCC: Radio Continues to Play After Ignition Off



MODEL



E90, E91, E92, E93 (3 Series) with CCC-Navigation (SA 609)



E60, E61 (5 Series) with CCC-Navigation (SA 609)



E63, E64 (6 Series)



E70 (X5) with CCC-Navigation (SA 609)



SITUATION



The customer states the radio continues to play even after the ignition is off.



CAUSE



CCC (Car Communication Computer) software



PROCEDURE



1. Check whether aftermarket equipment has been retrofitted to the MOST on the vehicle. This includes TCU, CDC, IPOD, etc. If so, check for a



correct wiring connection of terminal 15 and terminal 30. If these 2 terminals are swapped, the above situation may occur. Correct as needed.



Note:



Repairs related to the installation of use of or removal of any aftermarket components are not covered under warranty.



If aftermarket equipment is installed and operating correctly, proceed to the next step.



2. For vehicles with software older than integration level E060-05-09-520 or E89x-05-09-520, program the vehicle using the current version of



ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Business Development & Marketing Portal / Service



Operations / Workshop Technology / Vehicle Programming.



3. For vehicles manufactured since 9/2006 or programmed to integration level E060-05-09-520, E89x-05-09-520 or later, check whether the vehicle



is equipped with Comfort Access (SA 322). Rule out whether the vehicle is unintentionally left locked or unlocked with terminal R or terminal 15



on. Refer to SI B65 04 06 for more information.



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 117



[NEW] WARRANTY INFORMATION

BMW 528i (E60) L6-3.0L (N52K) Technical Service Bulletin # 654606 Date: 110401


CCC(R) - Radio Continues to Play After Ignition OFF



SI B65 46 06



Audio, Navigation, Monitors, Alarms, SRS



April 2011



Technical Service



This Service Information bulletin supersedes SI B65 46 06 dated May 2007.



[NEW] designates changes to this revision



SUBJECT



CCC: Radio Continues to Play After Ignition Off



MODEL



E90, E91, E92, E93 (3 Series) with CCC-Navigation (SA 609)



E60, E61 (5 Series) with CCC-Navigation (SA 609)



E63, E64 (6 Series)



E70 (X5) with CCC-Navigation (SA 609)



SITUATION



The customer states the radio continues to play even after the ignition is off.



CAUSE



CCC (Car Communication Computer) software



PROCEDURE



2010 BMW 528i (E60) L6-3.0L (N52K) Page 125



1. Check whether aftermarket equipment has been retrofitted to the MOST on the vehicle. This includes TCU, CDC, IPOD, etc. If so, check for a



correct wiring connection of terminal 15 and terminal 30. If these 2 terminals are swapped, the above situation may occur. Correct as needed.



Note:



Repairs related to the installation of use of or removal of any aftermarket components are not covered under warranty.



If aftermarket equipment is installed and operating correctly, proceed to the next step.



2. For vehicles with software older than integration level E060-05-09-520 or E89x-05-09-520, program the vehicle using the current version of



ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Business Development & Marketing Portal / Service



Operations / Workshop Technology / Vehicle Programming.



3. For vehicles manufactured since 9/2006 or programmed to integration level E060-05-09-520, E89x-05-09-520 or later, check whether the vehicle



is equipped with Comfort Access (SA 322). Rule out whether the vehicle is unintentionally left locked or unlocked with terminal R or terminal 15



on. Refer to SI B65 04 06 for more information.



[NEW] WARRANTY INFORMATION