2010 BMW M5 (E60) V10-5.0L (S85)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW M5 (E60) V10-5.0L (S85) Page 337

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW M5 (E60) V10-5.0L (S85) Page 338

2010 BMW M5 (E60) V10-5.0L (S85) Page 339

view PDF attachment B653009_Attachment_A.

2010 BMW M5 (E60) V10-5.0L (S85) Page 340

view PDF attachment B653009_Attachment_B.

Navigation System - Initialization Procedure

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 372

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 373

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 374

view PDF attachment B653009_Attachment_A.

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 375

view PDF attachment B653009_Attachment_B.

2010 BMW 750i (F01) V8-4.4L Turbo (N63)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 333

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 334

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 335

view PDF attachment B653009_Attachment_A.

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 336

view PDF attachment B653009_Attachment_B.

2010 BMW M3 Sedan (E90) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 219

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 220

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 221

view PDF attachment B653009_Attachment_A.

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 222

view PDF attachment B653009_Attachment_B.

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 343

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 344

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 345

view PDF attachment B653009_Attachment_A.

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 346

view PDF attachment B653009_Attachment_B.

2010 BMW 128i Convertible (E88) L6-3.0L (N51) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 322

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 323

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 324

view PDF attachment B653009_Attachment_A.

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 325

view PDF attachment B653009_Attachment_B.

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) DIAGNOSIS AND REPAIR, MAINTENANCE, DIAGNOSIS AND Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 303

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 304

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 305

view PDF attachment B653009_Attachment_A.

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 306

view PDF attachment B653009_Attachment_B.

BMW 528i (E60) L6-3.0L (N52K) Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

2010 BMW 528i (E60) L6-3.0L (N52K) Page 394

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 528i (E60) L6-3.0L (N52K) Page 395

2010 BMW 528i (E60) L6-3.0L (N52K) Page 396

view PDF attachment B653009_Attachment_A.

2010 BMW 528i (E60) L6-3.0L (N52K) Page 397

view PDF attachment B653009_Attachment_B.

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 313

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 314

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 315

view PDF attachment B653009_Attachment_A.

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 316

view PDF attachment B653009_Attachment_B.

2010 BMW M3 Convertible (E93) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 217

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 218

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 219

view PDF attachment B653009_Attachment_A.

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 220

view PDF attachment B653009_Attachment_B.

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 338

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 339

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 340

view PDF attachment B653009_Attachment_A.

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 341

view PDF attachment B653009_Attachment_B.

2010 BMW M3 Coupe (E92) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 223

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 224

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 225

view PDF attachment B653009_Attachment_A.

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 226

view PDF attachment B653009_Attachment_B.

2010 BMW M6 Convertible (E64) V10-5.0L (S85)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 340

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 341

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 342

view PDF attachment B653009_Attachment_A.

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 343

view PDF attachment B653009_Attachment_B.

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 372

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 373

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 374

view PDF attachment B653009_Attachment_A.

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 375

view PDF attachment B653009_Attachment_B.

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 575

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 576

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 577

view PDF attachment B653009_Attachment_A.

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 578

view PDF attachment B653009_Attachment_B.

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 406

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 407

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 408

view PDF attachment B653009_Attachment_A.

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 409

view PDF attachment B653009_Attachment_B.

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 653009 Date: 100401

Navigation System - Initialization Procedure

SI B 65 30 09

Audio, Navigation, Monitors, Alarms, SRS

April 2010

Technical Service

This Service Information bulletin supersedes SI B65 30 09 dated January 2010.

[NEW] designates changes to this revision

SUBJECT

[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1

MODEL

[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)

SITUATION

The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.

[NEW] INFORMATION

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 395

New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part

of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).

IMPORTANT:

There is no programming involved!

[NEW] PROCEDURE

Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.

Note:

In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is

valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the

Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded

part via the parts ordering process.

The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).

Note:

If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used

when the original order was placed.

Procedure for ordering and downloading the initial enabling code:

Refer to attachment A.

Procedure for activation of the navigation system map using ISTA:

Refer to attachment B.

For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.

PARTS INFORMATION

WARRANTY INFORMATION

Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.

ATTACHMENTS

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 396

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 397

view PDF attachment B653009_Attachment_A.

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 398

view PDF attachment B653009_Attachment_B.