BMW Z4 sDrive30i (E89) 630909 Date: 100401
Instruments - False Bulb Out Warning With Hazards ON
SI B 63 09 09
Lights
April 2010
Technical Service
This Service Information bulletin supersedes SI B63 09 09 dated November 2009.
[NEW] designates changes to this revision
SUBJECT
Bulb Out Warning: "Turn Indicator Defective"
MODEL
E90, E91 (3 Series) with halogen headlights
E89 (Z4)
Page 252
Vehicles produced from August 31, 2009 to September 20, 2009
SITUATION
When the hazard warning system is activated, intermittently a false "bulb out" warning is displayed. Vehicles with a CID (Central Information
Display) will additionally see a check control message displayed: "Turn indicator defective". All the turn signal (hazard) lamps are working without
fault.
CAUSE
Software error in the FRM3R footwell module
[NEW] CORRECTION
Perform diagnostics with ISTA and work through any related test modules. Program the vehicle using ISTA/P 2.37.0 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to Centernet / Aftersales Portal / Service / Workshop Technology / Vehicle
Programming.
[NEW] WARRANTY INFORMATION
Instruments - False Bulb Out Warning With Hazards ON
SI B 63 09 09
Lights
April 2010
Technical Service
This Service Information bulletin supersedes SI B63 09 09 dated November 2009.
[NEW] designates changes to this revision
SUBJECT
Bulb Out Warning: "Turn Indicator Defective"
MODEL
E90, E91 (3 Series) with halogen headlights
E89 (Z4)
Page 252
Vehicles produced from August 31, 2009 to September 20, 2009
SITUATION
When the hazard warning system is activated, intermittently a false "bulb out" warning is displayed. Vehicles with a CID (Central Information
Display) will additionally see a check control message displayed: "Turn indicator defective". All the turn signal (hazard) lamps are working without
fault.
CAUSE
Software error in the FRM3R footwell module
[NEW] CORRECTION
Perform diagnostics with ISTA and work through any related test modules. Program the vehicle using ISTA/P 2.37.0 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to Centernet / Aftersales Portal / Service / Workshop Technology / Vehicle
Programming.
[NEW] WARRANTY INFORMATION
