Steering - Squealing/Groaning/Grinding Noise
GROUP 32
Steering and Wheel Alignment
Bulletin Number
32 03 01
Woodcliff Lake, NJ
October 2001
Service engineering
SUBJECT:
Noise When Turning Steering Wheel
MODEL:
E38, E39, E53
SITUATION:
Some owners of E38s, E39s, and X5s, may complain of a squealing, groaning or grinding noise when turning the steering wheel.
CAUSE:
The plastic slip ring assembly that fits onto the steering shaft inside the rubber boot where the shaft passes through the engine compartment bulkhead
can score, causing a noise as the shaft turns. This scoring is caused by a problem between the two white slip rings and the fixed collar of the ring
assembly.
172
CORRECTION:
Slip ring assemblies made from improved materials are now available. The improved parts can be visually identified by the black plastic internal slip
rings; the earlier rings were white in color.
In case of a customer complaint, check to see if the noise is coming from the joint inside the rubber boot at the bulkhead. If this is the source of the
noise, replace the plastic ring(s), P/N 32 31 6 759 546. (E38 and E39 require one, E53 requires two)
PROCEDURE
Remove the lower steering column as per repair Manual, section 32 31 070.
E38 and E39 - Mark the inner and outer shafts and pull them apart. Slide the plastic ring assembly off the shaft, and install improved part. Align the
marks on the shafts and reassemble them.
E53 - Slide both plastic ring assemblies off the bottom of the shaft.
173
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
