Showing posts with label 161310. Show all posts
Showing posts with label 161310. Show all posts

Friday, 2 August 2019

BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Technical Service Bulletin # 161310 Date: 110201


Campaign - Retrofitting Of Protective Hose On SCR Line



SI B16 13 10



Fuel Systems



February 2011



Technical Service



PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY



ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS AND PRIOR TO RETAIL DELIVERY.



SUBJECT



Service Action: E90 M57Y Retrofitting of Protective Hose on SCR Line



MODEL



E90 with the M57Y diesel engine produced from 2/18/2010 to 10/1/2010



SITUATION



The protective covering is missing from the SCR (Selective Catalyst Reduction) line.



AFFECTED VEHICLES



This Service Action involves E90 vehicles with the M57Y diesel engine which were produced from 2/18/2010 to 10/1/2010.



In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action first check the B-pillar



label for code number 585. If code number 585 has been punched out, the campaign has already been performed. If code number 585 has not been



punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the



response of the system, either proceed with the corrective action or take no further action.



PROCEDURE



1. Locate the SCR line where it runs next to the driver's side fuel tank strap (1). Install protective hose (P/N 16 19 7 301 040) over the SCR line and



secure both ends with cable ties.



2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 207



2. Remove the four indicated clip nuts and screws from the front center engine insulation shield (1) and replace with four new clip nuts (P/N 41 35 7



060 601) and Torx screws (P/N 07 14 7 293 277). Torque the screws to 5Nm.



PARTS INFORMATION



LABEL INSTRUCTIONS



This Service Action has been assigned code number 585. After the vehicle has been checked and/or corrected, obtain a label (SD 92-395) and:



A. Emboss your BMW center warranty number in the middle of the label (1);



B. Punch out code number 585 (2), printed on the label; and



C. Affix the label to the B-pillar as shown.



If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on



top of another one, because a number from an underlying label could appear in the punched-out hole of the new label.



WARRANTY INFORMATION



2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 208