2020 BMW 128i Coupe (E82) L6-3.0L (N51) Technical Service Bulletin # 620311 Date: 120801

Instruments - Door Open Message/Chime Sounds

SI B62 03 11

Instruments

August 2012 Technical Service

This Service Information bulletin supersedes SI B62 03 11 dated October 2011.

[NEW] designates changes to this revision SUBJECT

ACC (Check Control) Message in the KOMBI Indicates the Doors Are Open

MODEL

[NEW]

E82 E88 E89 E90

E91 E92 E93

Vehicles produced from February 28, 2010 to February 28, 2012 E70

E71 E72

Vehicles produced from August 31, 2009 to March 31, 2012 SITUATION

One or more of the following situations can occur:

While the vehicle is in motion, a CC (Check Control) message in the KOMBI (instrument cluster) indicates that the doors are open, even though they are closed. In addition, a warning gong sometimes sounds, along with the interior lights turning on and off. This can affect all the doors.

The battery is discharged due to the FRM3 (footwell module) constantly waking the vehicle.

These situations can occur intermittently. The following fault code memory entries may also be present in the FRM:

0x9CBC - short-circuit or break in circuit in front door contacts, and/or

0x9CBD - short-circuit or break in circuit in rear door contacts CAUSE

A coding error in the FRM3 is causing incorrect door contact detection.

[NEW] PROCEDURE

Perform a vehicle test using ISTA/D (Integrated Service Technical Application, Diagnosis) and complete relevant test plans for any FRM fault codes that are stored.

Note:

When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery voltage reading in the repair order comments section.

Perform the conversion "Activate threshold change door contact" with ISTA/P 2.46.0 or higher. The HO word "SWTK" will be added to the VO.

Note:

After this conversion is added to the measures plan, finish the programming/coding procedure by accepting the measures plan and following the instructions as indicated in ISTA/P.

Refer to CenterNet / Aftersales / Aftersales Business Development & Marketing Portal / Service Operations / Workshop Technology for information about using ISTA/P.

BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Technical Service Bulletin # 610212 Date: 120801

Computer/Controls - 'Electronic Malfunction' Displayed

SI B61 02 12

General Electrical Systems

August 2012

Technical Service

This Service Information bulletin supersedes SI B61 02 12 dated January 2012.

SUBJECT

Check Control Message "Electronic Malfunction" Is Displayed Along with Various Electrical Functions Inoperative

MODEL

[NEW]

E70

E71

E72

E82 (Excluding the ActiveE/eDrive1-E82E)

2010 BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Page 29

E88

E90

E91

E92

E93

F01

F02

F04

F07

F10

F12

F13

F25

Vehicles produced from September 2009 to July 2012

SITUATION

Various check control messages are displayed, including "Electronic Malfunction" in the instrument cluster and CID (Central Information Display).

One or more of the following functional faults may also be present:

^ ISTA (Integrated Service Technical Application) diagnosis unable to communicate with the vehicle

^ Windshield wipers inoperative or in emergency operation (unable to turn off)

^ Tailgate cannot be opened

^ Central locking system not working

^ Rear power windows are inoperative

CAUSE

JBE (Junction Box Electronics) software error

PROCEDURE

Do not replace any parts.

1. Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software.

Note: When the ISTA system message displays:

"Battery voltage only "XX.XX" V. Please connect charger."

Please note the displayed battery voltage reading in the repair order comments section.

2. If ISTA is able to communicate with the vehicle, complete all relevant test plans related to the fault symptoms.

3. If ISTA will not communicate with the vehicle and the battery is accessible, perform a battery reset for approximately 30 minutes.

4. If ISTA will not communicate with the vehicle and the battery is not accessible in the trunk or cargo area, disconnect the JBE for

approximately 30 minutes.

Refer to ISTA Repair Instructions "Removing and installing or replacing junction box electronics".

5. After the battery reset (Step 3) or the JBE remove and reinstall procedure (Step 4), check the operation of all functions that were inoperable

and repeat Steps 1 and 2 as necessary.

6. [NEW] Program the vehicle using ISTA/P (Integrated Service Technical Application, programming) 2.47.2 or later.

[NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.

[NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology /

Vehicle Programming.

2010 BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Page 30

2010 BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Page 31

2010 BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Page 32

[NEW] WARRANTY INFORMATION

2020 BMW 128i Coupe (E82) L6-3.0L (N51) Technical Service Bulletin # 610212 Date: 120801

Computer/Controls - 'Electronic Malfunction' Displayed

SI B61 02 12

General Electrical Systems

August 2012 Technical Service

This Service Information bulletin supersedes SI B61 02 12 dated January 2012. SUBJECT

Check Control Message "Electronic Malfunction" Is Displayed Along with Various Electrical Functions Inoperative

MODEL

[NEW]

E70 E71 E72

E82 (Excluding the ActiveE/eDrive1-E82E) E88

E90 E91 E92 E93 F01

F02 F04 F07 F10 F12 F13 F25

Vehicles produced from September 2009 to July 2012 SITUATION

Various check control messages are displayed, including "Electronic Malfunction" in the instrument cluster and CID (Central Information Display). One or more of the following functional faults may also be present:

^ ISTA (Integrated Service Technical Application) diagnosis unable to communicate with the vehicle

^ Windshield wipers inoperative or in emergency operation (unable to turn off)

^ Tailgate cannot be opened

^ Central locking system not working

^ Rear power windows are inoperative CAUSE

JBE (Junction Box Electronics) software error

PROCEDURE

Do not replace any parts.

Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software.

Note: When the ISTA system message displays:

"Battery voltage only "XX.XX" V. Please connect charger."

Please note the displayed battery voltage reading in the repair order comments section.

If ISTA is able to communicate with the vehicle, complete all relevant test plans related to the fault symptoms.

If ISTA will not communicate with the vehicle and the battery is accessible, perform a battery reset for approximately 30 minutes.

If ISTA will not communicate with the vehicle and the battery is not accessible in the trunk or cargo area, disconnect the JBE for approximately 30 minutes.

Refer to ISTA Repair Instructions "Removing and installing or replacing junction box electronics".

After the battery reset (Step 3) or the JBE remove and reinstall procedure (Step 4), check the operation of all functions that were inoperable and repeat Steps 1 and 2 as necessary.

[NEW] Program the vehicle using ISTA/P (Integrated Service Technical Application, programming) 2.47.2 or later.

[NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.

[NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.

image

image

image

[NEW] WARRANTY INFORMATION

Not applicable. BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Technical Service Bulletin # 620311 Date: 120801

Instruments - Door Open Message/Chime Sounds

SI B62 03 11

Instruments

August 2012

Technical Service

This Service Information bulletin supersedes SI B62 03 11 dated October 2011.

[NEW] designates changes to this revision

SUBJECT

ACC (Check Control) Message in the KOMBI Indicates the Doors Are Open

MODEL

[NEW]

E82

E88

E89

E90

E91

E92

E93

Vehicles produced from February 28, 2010 to February 28, 2012

E70

2010 BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Page 29

E71

E72

Vehicles produced from August 31, 2009 to March 31, 2012

SITUATION

One or more of the following situations can occur:

1. While the vehicle is in motion, a CC (Check Control) message in the KOMBI (instrument cluster) indicates that the doors are open, even

though they are closed. In addition, a warning gong sometimes sounds, along with the interior lights turning on and off. This can affect all the

doors.

2. The battery is discharged due to the FRM3 (footwell module) constantly waking the vehicle.

These situations can occur intermittently. The following fault code memory entries may also be present in the FRM:

- 0x9CBC - short-circuit or break in circuit in front door contacts, and/or

- 0x9CBD - short-circuit or break in circuit in rear door contacts

CAUSE

A coding error in the FRM3 is causing incorrect door contact detection.

[NEW] PROCEDURE

1. Perform a vehicle test using ISTA/D (Integrated Service Technical Application, Diagnosis) and complete relevant test plans for any FRM fault

codes that are stored.

Note:

When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery

voltage reading in the repair order comments section.

2. Perform the conversion "Activate threshold change door contact" with ISTA/P 2.46.0 or higher. The HO word "SWTK" will be added to the

VO.

Note:

After this conversion is added to the measures plan, finish the programming/coding procedure by accepting the measures plan and

following the instructions as indicated in ISTA/P.

Refer to CenterNet / Aftersales / Aftersales Business Development & Marketing Portal / Service Operations / Workshop Technology for

information about using ISTA/P.

2010 BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Page 30

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 610212 Date: 120801

Computer/Controls - 'Electronic Malfunction' Displayed

SI B61 02 12

General Electrical Systems

August 2012

Technical Service

This Service Information bulletin supersedes SI B61 02 12 dated January 2012.

SUBJECT

Check Control Message "Electronic Malfunction" Is Displayed Along with Various Electrical Functions Inoperative

MODEL

[NEW]

E70

E71

E72

E82 (Excluding the ActiveE/eDrive1-E82E)

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 31

E88

E90

E91

E92

E93

F01

F02

F04

F07

F10

F12

F13

F25

Vehicles produced from September 2009 to July 2012

SITUATION

Various check control messages are displayed, including "Electronic Malfunction" in the instrument cluster and CID (Central Information Display).

One or more of the following functional faults may also be present:

^ ISTA (Integrated Service Technical Application) diagnosis unable to communicate with the vehicle

^ Windshield wipers inoperative or in emergency operation (unable to turn off)

^ Tailgate cannot be opened

^ Central locking system not working

^ Rear power windows are inoperative

CAUSE

JBE (Junction Box Electronics) software error

PROCEDURE

Do not replace any parts.

1. Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software.

Note: When the ISTA system message displays:

"Battery voltage only "XX.XX" V. Please connect charger."

Please note the displayed battery voltage reading in the repair order comments section.

2. If ISTA is able to communicate with the vehicle, complete all relevant test plans related to the fault symptoms.

3. If ISTA will not communicate with the vehicle and the battery is accessible, perform a battery reset for approximately 30 minutes.

4. If ISTA will not communicate with the vehicle and the battery is not accessible in the trunk or cargo area, disconnect the JBE for

approximately 30 minutes.

Refer to ISTA Repair Instructions "Removing and installing or replacing junction box electronics".

5. After the battery reset (Step 3) or the JBE remove and reinstall procedure (Step 4), check the operation of all functions that were inoperable

and repeat Steps 1 and 2 as necessary.

6. [NEW] Program the vehicle using ISTA/P (Integrated Service Technical Application, programming) 2.47.2 or later.

[NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.

[NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology /

Vehicle Programming.

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 32

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 33

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 34

[NEW] WARRANTY INFORMATION

BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Technical Service Bulletin # 620311 Date: 120801

Instruments - Door Open Message/Chime Sounds

SI B62 03 11

Instruments

August 2012

Technical Service

This Service Information bulletin supersedes SI B62 03 11 dated October 2011.

[NEW] designates changes to this revision

SUBJECT

ACC (Check Control) Message in the KOMBI Indicates the Doors Are Open

MODEL

[NEW]

E82

E88

E89

E90

2010 BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Page 27

E91

E92

E93

Vehicles produced from February 28, 2010 to February 28, 2012

E70

E71

E72

Vehicles produced from August 31, 2009 to March 31, 2012

SITUATION

One or more of the following situations can occur:

1. While the vehicle is in motion, a CC (Check Control) message in the KOMBI (instrument cluster) indicates that the doors are open, even

though they are closed. In addition, a warning gong sometimes sounds, along with the interior lights turning on and off. This can affect all the

doors.

2. The battery is discharged due to the FRM3 (footwell module) constantly waking the vehicle.

These situations can occur intermittently. The following fault code memory entries may also be present in the FRM:

- 0x9CBC - short-circuit or break in circuit in front door contacts, and/or

- 0x9CBD - short-circuit or break in circuit in rear door contacts

CAUSE

A coding error in the FRM3 is causing incorrect door contact detection.

[NEW] PROCEDURE

1. Perform a vehicle test using ISTA/D (Integrated Service Technical Application, Diagnosis) and complete relevant test plans for any FRM fault

codes that are stored.

Note:

When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery

voltage reading in the repair order comments section.

2. Perform the conversion "Activate threshold change door contact" with ISTA/P 2.46.0 or higher. The HO word "SWTK" will be added to the

VO.

Note:

After this conversion is added to the measures plan, finish the programming/coding procedure by accepting the measures plan and

following the instructions as indicated in ISTA/P.

Refer to CenterNet / Aftersales / Aftersales Business Development & Marketing Portal / Service Operations / Workshop Technology for

information about using ISTA/P.

2010 BMW 328xi Coupe AWD (E92) L6-3.0L (N52K) Page 28

Not applicable. 2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 620311 Date: 120801

Instruments - Door Open Message/Chime Sounds

SI B62 03 11

Instruments

August 2012

Technical Service

This Service Information bulletin supersedes SI B62 03 11 dated October 2011.

[NEW] designates changes to this revision

SUBJECT

ACC (Check Control) Message in the KOMBI Indicates the Doors Are Open

MODEL

[NEW]

E82

E88

E89

E90

E91

E92

E93

Vehicles produced from February 28, 2010 to February 28, 2012

E70

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 29

E71

E72

Vehicles produced from August 31, 2009 to March 31, 2012

SITUATION

One or more of the following situations can occur:

1. While the vehicle is in motion, a CC (Check Control) message in the KOMBI (instrument cluster) indicates that the doors are open, even

though they are closed. In addition, a warning gong sometimes sounds, along with the interior lights turning on and off. This can affect all the

doors.

2. The battery is discharged due to the FRM3 (footwell module) constantly waking the vehicle.

These situations can occur intermittently. The following fault code memory entries may also be present in the FRM:

- 0x9CBC - short-circuit or break in circuit in front door contacts, and/or

- 0x9CBD - short-circuit or break in circuit in rear door contacts

CAUSE

A coding error in the FRM3 is causing incorrect door contact detection.

[NEW] PROCEDURE

1. Perform a vehicle test using ISTA/D (Integrated Service Technical Application, Diagnosis) and complete relevant test plans for any FRM fault

codes that are stored.

Note:

When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery

voltage reading in the repair order comments section.

2. Perform the conversion "Activate threshold change door contact" with ISTA/P 2.46.0 or higher. The HO word "SWTK" will be added to the

VO.

Note:

After this conversion is added to the measures plan, finish the programming/coding procedure by accepting the measures plan and

following the instructions as indicated in ISTA/P.

Refer to CenterNet / Aftersales / Aftersales Business Development & Marketing Portal / Service Operations / Workshop Technology for

information about using ISTA/P.

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 30

BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Technical Service Bulletin # 610212 Date: 120801

Computer/Controls - 'Electronic Malfunction' Displayed

SI B61 02 12

General Electrical Systems

August 2012

Technical Service

This Service Information bulletin supersedes SI B61 02 12 dated January 2012.

SUBJECT

Check Control Message "Electronic Malfunction" Is Displayed Along with Various Electrical Functions Inoperative

MODEL

[NEW]

E70

E71

E72

E82 (Excluding the ActiveE/eDrive1-E82E)

2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 33

E88

E90

E91

E92

E93

F01

F02

F04

F07

F10

F12

F13

F25

Vehicles produced from September 2009 to July 2012

SITUATION

Various check control messages are displayed, including "Electronic Malfunction" in the instrument cluster and CID (Central Information Display).

One or more of the following functional faults may also be present:

^ ISTA (Integrated Service Technical Application) diagnosis unable to communicate with the vehicle

^ Windshield wipers inoperative or in emergency operation (unable to turn off)

^ Tailgate cannot be opened

^ Central locking system not working

^ Rear power windows are inoperative

CAUSE

JBE (Junction Box Electronics) software error

PROCEDURE

Do not replace any parts.

1. Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software.

Note: When the ISTA system message displays:

"Battery voltage only "XX.XX" V. Please connect charger."

Please note the displayed battery voltage reading in the repair order comments section.

2. If ISTA is able to communicate with the vehicle, complete all relevant test plans related to the fault symptoms.

3. If ISTA will not communicate with the vehicle and the battery is accessible, perform a battery reset for approximately 30 minutes.

4. If ISTA will not communicate with the vehicle and the battery is not accessible in the trunk or cargo area, disconnect the JBE for

approximately 30 minutes.

Refer to ISTA Repair Instructions "Removing and installing or replacing junction box electronics".

5. After the battery reset (Step 3) or the JBE remove and reinstall procedure (Step 4), check the operation of all functions that were inoperable

and repeat Steps 1 and 2 as necessary.

6. [NEW] Program the vehicle using ISTA/P (Integrated Service Technical Application, programming) 2.47.2 or later.

[NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.

[NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology /

Vehicle Programming.

2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 34

2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 35

2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 36

[NEW] WARRANTY INFORMATION

BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Technical Service Bulletin # 620311 Date: 120801

Instruments - Door Open Message/Chime Sounds

SI B62 03 11

Instruments

August 2012

Technical Service

This Service Information bulletin supersedes SI B62 03 11 dated October 2011.

[NEW] designates changes to this revision

SUBJECT

ACC (Check Control) Message in the KOMBI Indicates the Doors Are Open

MODEL

[NEW]

E82

E88

E89

E90

2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 31

E91

E92

E93

Vehicles produced from February 28, 2010 to February 28, 2012

E70

E71

E72

Vehicles produced from August 31, 2009 to March 31, 2012

SITUATION

One or more of the following situations can occur:

1. While the vehicle is in motion, a CC (Check Control) message in the KOMBI (instrument cluster) indicates that the doors are open, even

though they are closed. In addition, a warning gong sometimes sounds, along with the interior lights turning on and off. This can affect all the

doors.

2. The battery is discharged due to the FRM3 (footwell module) constantly waking the vehicle.

These situations can occur intermittently. The following fault code memory entries may also be present in the FRM:

- 0x9CBC - short-circuit or break in circuit in front door contacts, and/or

- 0x9CBD - short-circuit or break in circuit in rear door contacts

CAUSE

A coding error in the FRM3 is causing incorrect door contact detection.

[NEW] PROCEDURE

1. Perform a vehicle test using ISTA/D (Integrated Service Technical Application, Diagnosis) and complete relevant test plans for any FRM fault

codes that are stored.

Note:

When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery

voltage reading in the repair order comments section.

2. Perform the conversion "Activate threshold change door contact" with ISTA/P 2.46.0 or higher. The HO word "SWTK" will be added to the

VO.

Note:

After this conversion is added to the measures plan, finish the programming/coding procedure by accepting the measures plan and

following the instructions as indicated in ISTA/P.

Refer to CenterNet / Aftersales / Aftersales Business Development & Marketing Portal / Service Operations / Workshop Technology for

information about using ISTA/P.

2010 BMW 335d Sedan (E90) L6-3.0L DSL Turbo (M57Y) Page 32

BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Technical Service Bulletin # 610212 Date: 120801

Computer/Controls - 'Electronic Malfunction' Displayed

SI B61 02 12

General Electrical Systems

August 2012

Technical Service

This Service Information bulletin supersedes SI B61 02 12 dated January 2012.

SUBJECT

Check Control Message "Electronic Malfunction" Is Displayed Along with Various Electrical Functions Inoperative

MODEL

[NEW]

E70

E71

E72

E82 (Excluding the ActiveE/eDrive1-E82E)

2010 BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Page 31

E88

E90

E91

E92

E93

F01

F02

F04

F07

F10

F12

F13

F25

Vehicles produced from September 2009 to July 2012

SITUATION

Various check control messages are displayed, including "Electronic Malfunction" in the instrument cluster and CID (Central Information Display).

One or more of the following functional faults may also be present:

^ ISTA (Integrated Service Technical Application) diagnosis unable to communicate with the vehicle

^ Windshield wipers inoperative or in emergency operation (unable to turn off)

^ Tailgate cannot be opened

^ Central locking system not working

^ Rear power windows are inoperative

CAUSE

JBE (Junction Box Electronics) software error

PROCEDURE

Do not replace any parts.

1. Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software.

Note: When the ISTA system message displays:

"Battery voltage only "XX.XX" V. Please connect charger."

Please note the displayed battery voltage reading in the repair order comments section.

2. If ISTA is able to communicate with the vehicle, complete all relevant test plans related to the fault symptoms.

3. If ISTA will not communicate with the vehicle and the battery is accessible, perform a battery reset for approximately 30 minutes.

4. If ISTA will not communicate with the vehicle and the battery is not accessible in the trunk or cargo area, disconnect the JBE for

approximately 30 minutes.

Refer to ISTA Repair Instructions "Removing and installing or replacing junction box electronics".

5. After the battery reset (Step 3) or the JBE remove and reinstall procedure (Step 4), check the operation of all functions that were inoperable

and repeat Steps 1 and 2 as necessary.

6. [NEW] Program the vehicle using ISTA/P (Integrated Service Technical Application, programming) 2.47.2 or later.

[NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.

[NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology /

Vehicle Programming.

2010 BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Page 32

2010 BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Page 33

2010 BMW 335i Coupe (E92) L6-3.0L Turbo (N54) Page 34

[NEW] WARRANTY INFORMATION