Showing posts with label Fuel System - High Alcohol Fuel Detection. Show all posts
Showing posts with label Fuel System - High Alcohol Fuel Detection. Show all posts

Saturday, 15 December 2018

2010 BMW M5 (E60) V10-5.0L (S85)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



2010 BMW M5 (E60) V10-5.0L (S85) Page 114



ATTACHMENTS



2010 BMW M5 (E60) V10-5.0L (S85) Page 115



2010 BMW M5 (E60) V10-5.0L (S85) Page 116



2010 BMW M5 (E60) V10-5.0L (S85) Page 117



2010 BMW M5 (E60) V10-5.0L (S85) Page 118



2010 BMW M5 (E60) V10-5.0L (S85) Page 119



2010 BMW M5 (E60) V10-5.0L (S85) Page 120



2010 BMW M5 (E60) V10-5.0L (S85) Page 121



B130510 Fuel Composition Tester

Saturday, 1 December 2018

2010 BMW M3 Sedan (E90) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 139



ATTACHMENTS



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 140



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 141



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 142



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 143



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 144



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 145



2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 146



B130510 Fuel Composition Tester

Friday, 30 November 2018

BMW 528i (E60) L6-3.0L (N52K) Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 528i (E60) L6-3.0L (N52K) Page 139



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 528i (E60) L6-3.0L (N52K) Page 140



2010 BMW 528i (E60) L6-3.0L (N52K) Page 141



2010 BMW 528i (E60) L6-3.0L (N52K) Page 142



2010 BMW 528i (E60) L6-3.0L (N52K) Page 143



2010 BMW 528i (E60) L6-3.0L (N52K) Page 144



2010 BMW 528i (E60) L6-3.0L (N52K) Page 145



2010 BMW 528i (E60) L6-3.0L (N52K) Page 146



2010 BMW 528i (E60) L6-3.0L (N52K) Page 147



B130510 Fuel Composition Tester

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 145



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 146



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 147



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 148



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 149



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 150



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 151



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 152



2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 153



B130510 Fuel Composition Tester

Wednesday, 21 November 2018

2010 BMW M3 Coupe (E92) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 141



ATTACHMENTS



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 142



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 143



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 144



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 145



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 146



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 147



2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 148



B130510 Fuel Composition Tester

Tuesday, 20 November 2018

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 176



ATTACHMENTS



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 177



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 178



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 179



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 180



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 181



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 182



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 183



B130510 Fuel Composition Tester

Fuel System - High Alcohol Fuel Detection

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 130510 Date: 110401



Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 200



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 201



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 202



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 203



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 204



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 205



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 206



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 207



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 208



B130510 Fuel Composition Tester

Tuesday, 13 November 2018

2010 BMW M6 Convertible (E64) V10-5.0L (S85)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 129



ATTACHMENTS



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 130



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 131



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 132



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 133



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 134



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 135



2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 136



B130510 Fuel Composition Tester

Friday, 9 November 2018

2010 BMW 750i (F01) V8-4.4L Turbo (N63)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 189



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 190



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 191



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 192



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 193



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 194



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 195



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 196



2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 197



B130510 Fuel Composition Tester

Monday, 5 November 2018

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) DIAGNOSIS AND REPAIR, MAINTENANCE, DIAGNOSIS AND Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 178



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 179



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 180



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 181



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 182



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 183



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 184



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 185



2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 186



B130510 Fuel Composition Tester

Saturday, 3 November 2018

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 131



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 132



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 133



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 134



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 135



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 136



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 137



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 138



2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 139



B130510 Fuel Composition Tester

Thursday, 1 November 2018

2010 BMW 128i Convertible (E88) L6-3.0L (N51) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 196



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 197



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 198



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 199



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 200



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 201



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 202



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 203



2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 204



B130510 Fuel Composition Tester

Monday, 29 October 2018

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 205



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 206



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 207



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 208



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 209



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 210



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 211



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 212



2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 213



B130510 Fuel Composition Tester

Saturday, 27 October 2018

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 189



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 190



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 191



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 192



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 193



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 194



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 195



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 196



2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 197



B130510 Fuel Composition Tester

Sunday, 21 October 2018

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 189



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 190



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 191



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 192



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 193



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 194



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 195



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 196



2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 197



B130510 Fuel Composition Tester

Tuesday, 16 October 2018

2010 BMW M3 Convertible (E93) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 137



ATTACHMENTS



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 138



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 139



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 140



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 141



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 142



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 143



2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 144



B130510 Fuel Composition Tester

Sunday, 14 October 2018

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 130510 Date: 110401


Fuel System - High Alcohol Fuel Detection



SI B13 05 10



Fuel Systems



April 2011



Technical Service



This Service Information bulletin replaces SI B13 04 06 dated August 2006.



SUBJECT



Testing Fuel Composition



MODEL



All



SITUATION



Fuel blends containing a high percentage of alcohol (10% and above), mainly ethanol, are becoming more commercially available. Usage of E85 or



any other high alcohol content blend (e.g., E30) in BMW vehicles will cause various drivability complaints (cold start problems, stalling, reduced



performance, poor fuel economy, etc.); may cause excessive emissions; and may cause irreversible damage to engine, emission control and fuel



delivery systems due to incompatibility of materials with alcohols. Refer to SI B13 01 06 Alcohol Fuel Blends in BMW Vehicles for complete



details.



In order to correctly diagnose various drivability complaints caused by fuel blends with a high level of ethanol content, BMW is providing you with



an electronic fuel composition tester.



Fuel Composition Tester



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 244



P/N 83 30 0 439 685



Refer to B04 04 11 for more details.



PROCEDURE



Safety Precautions:



^ Gasoline is highly flammable; observe normal precautions for working with flammable liquids. Perform all tests away from any source of ignition.



A class B fire extinguisher must be available.



^ Wear protective eye protection with side shields and Nitrile rubber gloves for handling the tester.



^ Please adhere to any applicable OSHA regulations when handling gasoline.



^ Dispose of the mixture according to local, state and federal regulations.



Refer to the attached procedure for testing the fuel composition of gasoline.



WARRANTY INFORMATION



Component damage, malfunctions, or any drivability problems verified to be caused by the use of fuels containing more than 10% ethanol (or other



oxygenates with more than 2.8% oxygen by weight) will not be covered under BMW warranties as this is not considered a defect in materials or



workmanship. Always document the results found on the vehicle repair order whenever performing this test.



ATTACHMENTS



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 245



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 246



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 247



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 248



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 249



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 250



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 251



2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 252



B130510 Fuel Composition Tester