BMW Z4 sDrive30i (E89) 651009 Date: 130301 Navigation System - Vehicle Position Missing/Incorrect SI B65 10 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 651009 Date: 130301
Navigation System - Vehicle Position Missing/Incorrect
SI B65 10 09
Audio, Navigation, Monitors, Alarms, SRS
March 2013
Technical Service
This Service Information bulletin supersedes SI B65 10 09 dated September 2009.
[NEW] designates changes to this revision
SUBJECT
MODEL
[NEW]
E60
E61
E63
E64
F70
E71
E72
E82
E82E
E84
E88
E89
E90
E91
E92
E93
F01
F02
F04
F06
F07
F10
F12
F13
  Page 359
F25
F30
Vehicles with option 609 (Navigation System Professional, CIC)
SITUATION
The vehicle position is missing or incorrect on the navigation map.
[NEW] CAUSE
The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
[NEW] CORRECTION
Recalibrate the CIC navigation system
[NEW] PROCEDURE
Do not replace parts!
Refer to the attachment.
NOTE:
Before delivery of the vehicle to the customer, perform a calibration drive for 15 minutes at a speed of 30 mph.
Note:
When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery voltage
reading in the repair order comments section.
  Page 360
[NEW] WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle/SAV Limited Warranty.
  Page 361
  Page 362
  Page 363
ATTACHMENTS
View PDF attachment B651009_Attachment.

BMW Z4 sDrive30i (E89) 653209 Date: 130101 Audio System - Interference Noise From Speakers SI B65 32 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 653209 Date: 130101
Audio System - Interference Noise From Speakers
SI B65 32 09
Audio, Navigation, Monitors, Alarms, SRS
January 2013
Technical Service
This Service Information bulletin supersedes SI B65 32 09 dated November 2009.
[NEW] designates changes to this revision
SUBJECT
Interference Noise from the Loudspeakers
MODEL
All
SITUATION
Interference noise from the loudspeakers can be heard in all audio modes
CAUSE
Cause 1: The door panel is improperly fitted (torsion, stress, etc.).
Cause 2: The loudspeaker wiring or the loudspeaker itself is damaged.
[NEW] CORRECTION
1. Perform a vehicle test using the latest ISTA diagnostic software.
Note:
When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery
voltage reading in the repair order comments section. This documentation is not necessary when part of an approved Technical Service repair
procedure; the battery charger is required to be attached before performing the Vehicle Test.
2. Work through the appropriate test plans integrated in ISTA diagnosis:
Activities / Information search / Function Structure / 03 Body / Audio, Navigation, Telephone (MOST ring)/ [!] Current fault patterns / Audio
output fault patterns
3. Select the appropriate test plan from the list and click on "Display."
[NEW] WARRANTY INFORMATION
If performing ISTA diagnostics and the related test plans result in eligible and covered work, claim this work with the applicable defect code and
  Page 358
labor operations listed in KSD2.
Note:
Please follow any TeileClearing (TC) or Diagcode (DC) requirements that may apply to this work.

BMW Z4 sDrive30i (E89) 651011 Date: 121201 Audio System - Cannot Select SIRIUS/XM(R) Preset 2 SI B65 10 11 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 651011 Date: 121201
Audio System - Cannot Select SIRIUS/XM(R) Preset 2
SI B65 10 11
Audio, Navigation, Monitors, Alarms, SRS
December 2012
Technical Service
This Service Information bulletin supersedes SI B65 10 11 dated July 2011.
[NEW] designates changes to this revision
  Page 351
SUBJECT
SIRIUS/XM Radio Station Stored on Preset # 2 Cannot Be Selected via SVS
MODEL
All with option 609 (Navigation System Professional, CIC) and option 655 (Satellite Radio)
SITUATION
When a SIRIUS/XM satellite radio station is stored on Preset #2, it cannot be selected using the voice recognition system (SVS). All other presets
can be used without a problem.
Note: AM/FM stations are not affected!
CAUSE
Software issue in the Car Information Computer (CIC)
[NEW] CORRECTION
Do not replace parts for this issue.
1. Reprogram the vehicle using ISTA/P 2.48.1 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
2. Complete all of the post-programming work as indicated in the ISTA/P Final Report. This includes performing diagnosis and clearing faults
with ISTA, if necessary.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle
Programming.
Note:
When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery
voltage reading in the repair order comments section. This documentation is not necessary when part of an approved Technical Service
repair procedure; the battery charger is required to be attached before performing the Vehicle Test.
  Page 352
[NEW] WARRANTY INFORMATION

BMW Z4 sDrive30i (E89) 652010 Date: 101101 iPhone(R)/iPod Touch(R) - Audio Output Interruptions SI B65 20 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 652010 Date: 101101
iPhone(R)/iPod Touch(R) - Audio Output Interruptions
SI B65 20 10
Audio, Navigation, Monitors, Alarms, SRS
November 2010
Technical Service
SUBJECT
USB Audio Output Is Inoperative or Intermittently Interrupted
MODEL
All models
Produced from 09/2010 with option 6FL (iPod and USB adapter) and option 6VC (Combox controller)
SITUATION
With the iPhone or iPod Touch connected to the vehicle via the white Apple USB cable, the audio output may be:
^ Intermittently interrupted
^ Interrupted after unplugging and reconnecting the USB device, or after a vehicle start
CAUSE
The Apple software iOS4.1 installed on the Apple iPhone and iPod Touch devices
INFORMATION
Do not replace parts and do not perform any repair attempt!
Explain to the customer that the Apple software iOS4.1 is causing this behavior. The Apple device must be updated with the improved Apple
software iOS4.2 as soon as it becomes available.
The Apple software update on the device must be performed by the customer. For information on Apple software availability and the update process
please refer to the Apple web site:www.apple.com/iphone/software-update/

BMW Z4 sDrive30i (E89) 650910 Date: 101001 Entertainment Sys - DVD Changer Media6 Can't Be Selected SI B65 09 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 650910 Date: 101001
Entertainment Sys - DVD Changer Media6 Can't Be Selected
SI B65 09 10
Audio, Navigation, Monitors, Alarms, SRS
October 2010
Technical Service
SUBJECT
Media #6 in the DVD Changer Cannot Be Selected
MODEL
E89 *(Z4)
E70 *(X5)
E71, E72 *(X6)
F01, F02, F04 *(7 Series)
F07, F10 *(5 Series)
  Page 314
* Vehicles from 07/2009 with option 696 (DVD changer)
SITUATION
Media #6 (CD/DVD) inserted in the 6-disc DVD changer cannot be selected and is not displayed.
CAUSE
Software application error in the DVD changer (MMC2)
The storage space is not sufficient for very long titles. Therefore only five media can be displayed in certain cases.
INFORMATION
Do not replace parts!
This Service Information will be updated as soon as an improvement is available.
WARRANTY INFORMATION
For information only

BMW Z4 sDrive30i (E89) 651510 Date: 101001 Audio - 'Acquiring' Displays If No HD Signal Is Avail SI B65 15 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 651510 Date: 101001
Audio - 'Acquiring' Displays If No HD Signal Is Avail
SI B65 15 10
Audio, Navigation, Monitors, Alarms, SRS
October 2010
Technical Service
SUBJECT
"Acquiring" Is Displayed Permanently If No HD Signal Is Available
MODEL
E82, E88 (1 Series)
E89 (Z4)
E90, E91, E92, E93 (3 Series)
Vehicles from 09/2010 with option 663 (Radio Professional, RAD2+) and option 653 (HD Radio)
SITUATION
When an HD radio station is selected, "acquiring" is displayed if no HD signal is available on that frequency. The message "acquiring" will only
disappear when the HD radio station is available again or by switching the radio station.
NOTE:
Audio from the main station (AM/FM) can be heard.
CAUSE
  Page 311
Application error in the RAD2+ radio
INFORMATION
Do not replace parts!
Explain the situation to the customer.
NOTE:
If the customer prefers, the HD radio function can be turned off in the radio settings. This would leave the radio in non-HD mode.
This Service Information will be updated as soon as an official field solution is available.
WARRANTY INFORMATION
For information only

BMW Z4 sDrive30i (E89) 652403 Date: 100801 Restraint System - Passenger Airbag Status Lamp Info. SI B 65 24 03 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 652403 Date: 100801
Restraint System - Passenger Airbag Status Lamp Info.
SI B 65 24 03
Audio, Navigation, Monitors, Alarms, SRS
August 2010
Technical Service
This Service Information bulletin supersedes SI B65 24 03 dated November 2006.
[NEW] designates changes to this revision
SUBJECT
Passenger Airbag Status Lamp
MODELS
All models with a Passenger Airbag Status Lamp
INFORMATION
This bulletin is intended to address customer questions you may receive regarding operation of the Passenger Airbag Status Lamp, once the customer
has consulted the Owner's Manual.
The Passenger Airbag Status Lamp is installed to meet a National Highway Traffic Safety Administration (NHTSA) regulation and, except for in the
Z4, is located in the headliner near the interior light (the E60 installation is shown in the illustration). On the Z4, the status lamp is located on the
center console.
  Page 273
The Passenger Airbag Status Lamp illuminates to show that the front passenger airbag is OFF (not active).
[NEW] For an overview by vehicle, refer to the attachment "POL matrix"
[NEW] For E60, E65 and E66 to 9/04; E83 to 9/05; E85 to 10/04; and F01 and F02 to 9/09 with the 0C3 (pressure-sensing) occupancy mat,
the lamp is illuminated:
^ With the ignition in the "ON" position AND the passenger seat unoccupied
^ With the ignition in the "ON" position AND when a child in a rear-facing child restraint system is recognized
^ [NEW] With the ignition in the "ON" position AND the passenger airbag deactivation switch in the "OFF" position (E85 only).
The lamp illuminates briefly during start-up and stays illuminated if a child in a rear-facing child restraint system is recognized or if the passenger
seat is unoccupied. The lamp goes out if an adult or a child of sufficient size is recognized.
[NEW] For all vehicles with the 0C3 (pressure-sensing) occupancy mat except those stated above, the lamp is illuminated:
^ With the ignition in the "ON" position AND when a child in a rear-facing child restraint system is recognized
^ With the ignition in the "ON" position AND the passenger airbag deactivation switch in the "OFF" position (E85 and E86 only).
The lamp illuminates briefly during start-up and stays illuminated if a child in a rear-facing child restraint system is recognized. The lamp goes out if
an adult or a child of sufficient size is recognized, or if the passenger seat is unoccupied.
[NEW] For all vehicles with the CIS (capacitive-sensing) occupancy mat, the lamp is illuminated:
^ With the ignition in the "ON" position AND the passenger seat unoccupied
^ [NEW] With the ignition in the "ON" position AND when a child in a child restraint system is recognized.
The lamp illuminates briefly during start-up and stays illuminated if a child in a child restraint system is recognized. The lamp goes out if the
passenger seat is occupied, regardless of the size of the individual (no child restraint system).
WARRANTY INFORMATION
For information only
ATTACHMENTS
  Page 274
view PDF attachment

BMW Z4 sDrive30i (E89) 651810 Date: 101001 Audio - iPod/iPhone(R) Poor Audio Quality/No Recognition SI B65 18 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 651810 Date: 101001
Audio - iPod/iPhone(R) Poor Audio Quality/No Recognition
SI B65 18 10
Audio, Navigation, Monitors, Alarms, SRS
October 2010
Technical Service
SUBJECT
iPod/iPhone Has Extremely Poor Audio Quality and/or Is Not Recognized
MODEL
All models
Produced between 02/28/2007 and 10/31/2010 with option 6FL (USB Audio Interface)
SITUATION
When the iPod/iPhone is connected to the USB connector with the original Apple USB cable (white cable which comes with the iPod/iPhone):
^ The audio quality may be extremely poor
^ The device may not be recognized intermittently
CAUSE
1. Defective Apple USB cable or defective 30-pin socket on the iPod/iPhone
2. Defect in the USB audio interface (ULF, hands-free charging module integrated in the CIC)
CORRECTION
Cause 1:
Check the function with an Apple USB cable known to work properly; if it is still acting the same way, test the original Apple USB cable with an
iPod/iPhone known to work properly.
If both tests do not resolve the issue, follow the procedure outlined for Cause 2.
Cause 2:
1. Connect a BMW approved battery charger and perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic
software.
2. Diagnose any relevant faults that are stored by completing the test plans.
3. Perform and complete the test plan "AT8400_SYSTEL - Check of telecommunications system". Please note the DIAGCODE (Diagnosis Code)
  Page 270
presented at the end of the test plan. The test plan can be accessed via the following path:
^ Select "Activities\Information Search/Function structure\Body\Audio,Video,Navigation, Telephone (MOST ring)\Telecommunications" and start
search.
^ In Telecommunications, select "AT8400_SYSTEL - Check of telecommunications system" and press "Display".
^ Follow the on-screen instructions to work through the test plan.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle/SAV Limited Warranty as applicable.

BMW Z4 sDrive30i (E89) 650610 Date: 100801 Campaign 569 - Replace RAD2+ Radio SI B65 06 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 650610 Date: 100801
Campaign 569 - Replace RAD2+ Radio
SI B65 06 10
Audio, Navigation, Monitors, Alarms, SRS
August 2010
Technical Service
This Service Information bulletin supersedes SI B65 06 10 dated July 2010.
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER
DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
[NEW] designates changes to this revision
SUBJECT
[NEW] Service Action: Replace the RAD2+ Radio
MODEL
E82, E88 *(1 Series)
E89 *(Z4)
E90, E91, E92, E93 *(3 Series)
*with option 663 (Radio BMW Professional, RAD2+) and option 655 (Satellite radio)
[NEW] SITUATION
After programming the vehicle with ISTA/P, the radio is completely inoperative and cannot be recovered.
^ The radio display is blank.
^ The audio output is inoperative.
CAUSE
Hardware failure in the RAD2+ radio
[NEW] AFFECTED VEHICLES
This Service Action involves 1 Series, 3 Series and Z4 vehicles which were produced from January 8, 2010, to February 27, 2010.
In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar
label for code number 569. If code number 569 has been punched out, the campaign has already been performed. If code number 569 has not been
  Page 268
punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the
response of the system, either proceed with the corrective action or take no further action.
[NEW] CORRECTION
Replace the RAD2+ radio (REP 65 12 220) and reprogram the vehicle using ISTA/P 2.38.1 or higher.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet/Aftersales Portal/Service/Workshop Technology/Vehicle
Programming.
[NEW] PARTS INFORMATION
[NEW] LABEL INSTRUCTIONS
This Service Action has been assigned code number 569. After the vehicle has been checked and/or corrected, obtain a label (SD 92-380) and:
A. Emboss your BMW center warranty number in the middle of the label (1):
B. Punch out code number 569 (2), printed on the label; and
C. Affix the label to the B-Pillar as shown.
If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on
top of another one, because a number from an underlaying label could appear in the punched-out hole of the new label.
  Page 269
[NEW] WARRANTY INFORMATION

BMW Z4 sDrive30i (E89) 651710 Date: 101001 Campaign - Vehicle Order (VO) Is Incorrect SI B65 17 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 651710 Date: 101001
Campaign - Vehicle Order (VO) Is Incorrect
SI B65 17 10
Audio, Navigation, Monitors, Alarms, SRS
  Page 263
October 2010
Technical Service
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER
DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
SUBJECT
Service Action: Correct the Vehicle Order
MODEL
E89 *(Z4)
*with option 663 (RAD2+, Radio Professional)
SITUATION
ISTA doesn't recognize the vehicles since the vehicle order (VO) is incorrect. The E-word "EMOA" (discontinuation of MOST interface) is missing
in the vehicle order.
CAUSE
The MOST interface has been discontinued since September 2009.
AFFECTED VEHICLES
This Service Action involves Z4 vehicles which were produced from August 24, 2009 up to June 15, 2010.
In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar
label for code number 579. If code number 579 has been punched out, the campaign has already been performed. If code number 579 has not been
punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the
response of the system, either proceed with the corrective action or take no further action.
CORRECTION
Using the programming and coding tool ISTA/P 2.39.1 or higher, add the E-word "EMOA" to the vehicle order.
PROCEDURE
Refer to the attached Repair Procedure.
LABEL INSTRUCTIONS
This Service Action has been assigned code number 579. After the vehicle has been checked and/or corrected, obtain a label (SD 92-380) and:
A. Emboss your BMW center warranty number in the middle of the label (1);
B. Punch out code number 579 (2), printed on the label; and
C. Affix the label to the B-pillar as shown.
If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on
top of another one, because a number from an underlying label could appear in the punched-out hole of the new label.
  Page 264
WARRANTY INFORMATION
ATTACHMENTS
B651710 - Repair Procedure

BMW Z4 sDrive30i (E89) 653009 Date: 100401 Navigation System - Initialization Procedure SI B 65 30 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 653009 Date: 100401
Navigation System - Initialization Procedure
SI B 65 30 09
Audio, Navigation, Monitors, Alarms, SRS
April 2010
Technical Service
This Service Information bulletin supersedes SI B65 30 09 dated January 2010.
[NEW] designates changes to this revision
SUBJECT
[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1
MODEL
[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)
SITUATION
The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.
[NEW] INFORMATION
  Page 256
New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part
of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).
IMPORTANT:
There is no programming involved!
[NEW] PROCEDURE
Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.
Note:
In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is
valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the
Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded
part via the parts ordering process.
The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).
Note:
If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used
when the original order was placed.
Procedure for ordering and downloading the initial enabling code:
Refer to attachment A.
Procedure for activation of the navigation system map using ISTA:
Refer to attachment B.
For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.
PARTS INFORMATION
WARRANTY INFORMATION
Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.
ATTACHMENTS
  Page 257
  Page 258
view PDF attachment B653009_Attachment_A.
  Page 259
view PDF attachment B653009_Attachment_B.

BMW Z4 sDrive30i (E89) 650310 Date: 100301 Cell Phone - New Generation iPhone(R) Not Recognized SI B 65 03 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 650310 Date: 100301
Cell Phone - New Generation iPhone(R) Not Recognized
SI B 65 03 10
Audio, Navigation, Monitors, Alarms, SRS
March 2010
Technical Service
SUBJECT
Apple iPhone 3G/3GS Is Not Recognized
MODEL
All models from September 2008 on with option 6NF (Smart Phone Integration), option 6FL (USB Audio Interface) and option 639 (BMW Assist)
SITUATION
After the customer has upgraded to a new generation iPhone 3G/3GS, the phone is not recognized when connected via the snap-in adapter.
^ No audio output
^ No music file information
CAUSE
An earlier model of the snap-in adapter is installed, which does not support the new generation iPhone 3G/3GS.
CORRECTION
Install the correct snap-in adapter for the new generation iPhone 3G/3GS.
INFORMATION
For more details on the snap-in adapter parts, compatibility, and features, refer to the attached Aftersales bulletin.
WARRANTY INFORMATION
IMPORTANT:
Upgrading the snap-in adapter is not covered under Warranty.
ATTACHMENTS
  Page 192
B650310_Attachment_A.

BMW Z4 sDrive30i (E89) 653809 Date: 100101 Car Information Computer (CIC) - Nav. Road Map Update SI B 65 38 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 653809 Date: 100101
Car Information Computer (CIC) - Nav. Road Map Update
SI B 65 38 09
Audio, Navigation, Monitors, Alarms, SRS
January 2010
Technical Service
SUBJECT
CIC Navigation Road Map Update
MODEL
All models from September 2008 on with option 609 (Navigation System Professional, CIC)
INFORMATION
When requested by the customer, the Car Information Computer (CIC) road map database can be updated using a DVD set. However, this is not a
warranty matter, and the customer should be charged accordingly.
Note:
With the introduction of the CIC navigation road map version "PREMIUM 2010", the road map update must be activated via an enable code (FSC).
Refer to SI B65 30 09 for details.
PROCEDURE
Refer to Attachment A.
PARTS INFORMATION
WARRANTY INFORMATION
IMPORTANT:
  Page 179
Updating the CIC navigation road map database is not covered under Warranty.
PROCEDURE
1. Connect the vehicle to a BMW approved battery charger.
2. Turn the ignition on.
3. Select the menu "Navigation" via the iDrive controller.
4. Insert the CIC navigation road map update DVD #1. The update process will start automatically, with the progress shown visually on the screen.
5. After DVD #1 is loaded, a message on the display will prompt you to insert DVD #2. Manually eject DVD #1 and insert DVD #2.
6. The update process will restart automatically.
  Page 180
7. After DVD #2 is loaded, a message on the display will prompt you to insert DVD #3. Manually eject DVD #2 and insert DVD #3.
8. The update process will restart automatically.
9. After DVD #3 is loaded, a message on the display will prompt you to restart the system. Select and press "OK" to restart the system.
10. The system will then restart with the updated CIC navigation road map database.
11. The CIC navigation system version can be checked in "Options".

BMW Z4 sDrive30i (E89) 652909 Date: 091001 Satellite Radio - Favorite Stations Cannot Be Stored SI B 65 29 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 652909 Date: 091001
Satellite Radio - Favorite Stations Cannot Be Stored
SI B 65 29 09
Audio, Navigation, Monitors, Alarms, SRS
October 2009
Technical Service
SUBJECT
Satellite Radio: Favorite Cannot Be Stored in Certain Cases
  Page 168
MODEL
INFORMATION
On the above-mentioned models, the satellite receiver (SDARS) is integrated into the head unit (CIC and RAD2+).
With the new generation satellite receiver, it is possible to store 30 favorites in the "Favorites list".
SITUATION
In certain cases, the displayed "Artist" and "Title" information cannot be stored in the menu "Favorites". Only the "Channel" can be stored in
"Presets".
See the attachment.
This occurs only on XM channels that are transmitted from a different SIRIUS-XM database.
CAUSE
SIRIUS-XM has two different data bases for broadcasting SIRIUS and XM channels.
There are issues with broadcasting XM channels into the SIRIUS channel line-up.
CORRECTION
Do not replace parts! This is not a fault of the satellite receiver; therefore, no diagnosis is necessary.
SIRIUS-XM is working on a solution. Please explain the current situation to the customer.
WARRANTY INFORMATION
For information only
  Page 169
ATTACHMENTS - B652909 Procedure

BMW Z4 sDrive30i (E89) 652410 Date: 101201 Antitheft - Alarm Is Triggered During Heavy Rain SI B65 24 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 652410 Date: 101201
Antitheft - Alarm Is Triggered During Heavy Rain
SI B65 24 10
Audio, Navigation, Monitors, Alarms, SRS
December 2010
Technical Service
SUBJECT
DWA Alarm Goes Off During Heavy Rain
  Page 163
MODEL
E88 (1 Series)
E89 (Z4)
E93 (3 Series)
Vehicles produced from 2/1/2009 and equipped with option 302 (Anti-theft Alarm System)
SITUATION
The DWA (Anti-theft Alarm System) is triggered during heavy rain.
CAUSE
The sensitivity of the anti-theft interior motion detection sensors in the doors can trigger the alarm during heavy rain.
PROCEDURE
Perform diagnosis using ISTA (Integrated Service Technical Application), and troubleshoot any faults related to the DWA system.
If the system identifies the alarm as being triggered by the door interior protection sensors, follow the procedure attached to this Service Information
bulletin.
If the system does not identify the alarm as being triggered by the door interior protection sensor, follow standard troubleshooting.
PARTS INFORMATION
  Page 164
WARRANTY INFORMATION
ATTACHMENT
  Page 165
B65 24 10 - PROCEDURE

BMW Z4 sDrive30i (E89) 654009 Date: 110101 Navigation System - European Road Map Data Displayed SI B65 40 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 654009 Date: 110101
Navigation System - European Road Map Data Displayed
SI B65 40 09
Audio, Navigation, Monitors, Alarms, SRS
January 2011
Technical Service
This Service Information bulletin supersedes SI B65 40 09 dated February 2010.
[NEW] designates changes to this revision
SUBJECT
CIC Navigation: European Road Map Is Displayed
MODEL
All models from September 2008 on with option 609 (Navigation System Professional, CIC)
SITUATION
The European road map is displayed or the vehicle position is in the middle of the Atlantic Ocean.
^ The current vehicle position is incorrect.
^ No US addresses can be entered.
CAUSE
The road map test function is activated.
CORRECTION
Deactivate the road map test function.
[NEW] PROCEDURE A
Refer to Attachment A.
  Page 159
WARRANTY INFORMATION
ATTACHMENTS
  Page 160
  Page 161
  Page 162
B654009 - PROCEDURE

BMW Z4 sDrive30i (E89) 651910 Date: 110301 Audio - CD/DVD Changer Is Inoperative/DTC 9D4E SI B65 19 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 651910 Date: 110301
Audio - CD/DVD Changer Is Inoperative/DTC 9D4E
SI B65 19 10
Audio, Navigation, Monitors, Alarms, SRS
March 2011
Technical Service
This Service Information bulletin supersedes SI B65 19 10 dated November 2010.
[NEW] designates changes to this revision
SUBJECT
CD/DVD Changer Is Inoperative
MODEL
E89 (Z4)
E70 (X5)
E71, E72 (X6)
F01, F02 (7 Series)
F07 (5 Series)
Produced up to January 27th, 2010 with option 696 (DVD changer) or option 672 (CD Changer)
SITUATION
Scenario 1: The CD/DVD changer is inoperative and all LEDs are flashing rapidly.
Scenario 2: The CD/DVD changer is inoperative; the LEDs are not flashing.
In both scenarios, the inserted CDs/DVDs can neither be played nor ejected.
CAUSE
The CD/DVD changer is in safety mode and is locked. Fault code 9D4E can be stored in the CD/DVD changer.
CORRECTION
  Page 156
Connect a BMW approved battery charger and perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic
software.
Diagnose any relevant faults that are stored by completing the test plans.
Scenario 1
Perform and complete the test plan "AW6512_WAS7-CD changer/DVD changer: All LEDs flash in quick succession". Please note the DIAGCODE
(Diagnosis Code) presented at the end of the test plan. The test plan can be accessed via the following path:
^ Select "Activities\Information Search\Function structure\Body\Audio, Video, Navigation, Telephone (MOST ring)\Fault patterns\CD changer
/DVD changer: All LEDs flash in quick succession" and start search.
^ Select AW6512_WAS7-CD changer/DVD changer: All LEDs flash in quick succession" and press "Display".
^ Follow the on-screen instructions to work through the test plan.
Scenario 2
Perform and complete the test plan "B6512_MMCE70-DVD Changer". Please note the DIAGCODE (Diagnosis Code) presented at the end of the
test plan. The test plan can be accessed via the following path:
^ Select "Activities\Information Search\Function structure\Body\Audio, Video, Navigation, Telephone (MOST ring)\DVD Changer\DVD Changer"
and start search.
^ Select "B6512_MMCE70-DVD Changer" and press "Display".
^ Follow the on-screen instructions to work through the test plan.
WARRANTY INFORMATION

BMW Z4 sDrive30i (E89) 650709 Date: 110401 Navigation System - Missing/Incorrect Road Map Data SI B65 07 09 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 650709 Date: 110401
Navigation System - Missing/Incorrect Road Map Data
SI B65 07 09
Audio, Navigation, Monitors, Alarms, SRS
April 2011
Technical Service
This Service Information bulletin replaces SI 65 07 09 dated August 2010.
[NEW] designates changes to this revision
SUBJECT
Navigation System Has Missing or Incorrect Road Map Data
MODEL
All models with option 609 (Navigation System Professional) and NAV road map from Tele Atlas(R)
SITUATION
The route guidance is inaccurate and therefore irritating to the customer; or it is not possible to locate certain addresses, for instance:
^ Street name, house number or city is missing or incorrect
  Page 151
^ Point Of Interest (P0I) is missing or incorrect
^ Map feature is missing or incorrect
^ Bridge
^ Roundabout/rotary
^ Housing development/estate
The route calculation has discrepancies for certain addresses, for instance:
^ Distance is incorrect
^ Travel time is incorrect
^ Changes regarding vehicle restrictions
^ Lane direction changes, dependent on time and day
^ One way streets
^ Highway exits
^ Toll roads
CORRECTION
The Tele Atlas(R) Road Map has incorrect or missing data.
INFORMATION
Do not replace parts!
This is not a hardware problem in the BMW navigation systems.
[NEW] Therefore, a road map error or missing data must be reported directly to Tele Atlas(R) by accessing the following link (for BMW
customers):
For a brief description on how to report a road map error or missing data, please refer to attachment A.
IMPORTANT:
^ The customer must have the latest available Tele Atlas(R) Road Map data before reporting an error. Road Map Error Reports on older Road Maps
will not be processed by Tele Atlas(R).
^ A valid email address should be provided so that Tele Atlas(R) can reply to customer feedback.
WARRANTY INFORMATION
For information only
ATTACHMENTS
  Page 152
  Page 153
  Page 154
B650709-Procedure

BMW Z4 sDrive30i (E89) 650410 Date: 110401 Navigation - Update Navigation After (CIC) Head Replaced SI B65 04 10 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 650410 Date: 110401
Navigation - Update Navigation After (CIC) Head Replaced
SI B65 04 10
Audio, Navigation, Monitors, Alarms, SRS
April 2011
Technical Service
This Service Information bulletin supersedes SI B65 04 10 dated March 2010.
[NEW] designates changes to this revision
SUBJECT
  Page 131
CIC Navigation Road Map Installation After CIC Replacement
MODEL
All models with option 609 (Navigation System Professional, CIC)
INFORMATION
The replacement Car Information Computer (CIC) always come with the latest Navigation Road Map database installed.
SITUATION
When replacing a CIC head unit, the road map database version that was in the defective CIC must be installed in the new CIC.
[NEW] PROCEDURE
IMPORTANT:
Before replacing the defective CIC head unit, identify the NAV road map version installed in the defective CIC.
Install the appropriate CIC NAV road map through either ISTA/P or the DVD road map set:
^ Using ISTA/P, refer to Attachment A.
^ Using DVD road map set, refer to Attachment B.
Note:
When installing the CIC NAV road map via the DVD road map set, the REPAIR enabling code must be requested through ASAP. Refer to
Attachment C.
WARRANTY INFORMATION
ATTACHMENTS
  Page 132
  Page 133
  Page 134
  Page 135
B650410 Attachment A
  Page 136
  Page 137
  Page 138
  Page 139
B650410 Attachment B
  Page 140
  Page 141
B650410 Attachment C

BMW Z4 sDrive30i (E89) 650707 Date: 110701 Audio System - SDARS/SIRIUS(R) Radio Inoperative SI B65 07 07 Audio, Navigation, Monitors, Alarms, SRS

BMW Z4 sDrive30i (E89) 650707 Date: 110701
Audio System - SDARS/SIRIUS(R) Radio Inoperative
SI B65 07 07
Audio, Navigation, Monitors, Alarms, SRS
July 2011
Technical Service
This Service Information bulletin supersedes SI 65 07 07 dated March 2008.
[NEW] designates changes to this revision
SUBJECT
SDARS SIRIUS Radio Is Intermittently Inoperative
MODEL
All
Vehicles equipped with option 655 (Satellite Radio)
SITUATION
The SIRIUS/XM satellite radio is intermittently inoperative and "Acquiring" is displayed in certain cases.
[NEW] CAUSE
The antenna signal is missing for the following possible reasons:
  Page 99
1. The vehicle is in an area without connection to the SIRIUS/XM satellite.
^ Inside a building (parking garage, workshop, ...)
^ In tunnels
^ In a dense urban area surrounded by high-rise buildings
^ Under trees
^ In a valley or mountainous area
2. Defective SDARS antenna
3. Defective SDARS antenna cable
4. Defective connector on:
^ The SDARS antenna
^ The SDARS receiver
5. Internal fault in the SDARS receiver
[NEW] CORRECTION
Try to reproduce the complaint with the customer when possible. If it can be reproduced, follow the procedure below.
[NEW] PROCEDURE
Cause #1
A. Ask the customer where (location) and how often it is happening (can it be reproduced all the time?)
^ Try a similar vehicle for verification at the same location and time.
If it acts the same way, then the functionality is normal and no further steps have to be taken.
^ For information on SIRIUS/XM satellite radio functionality, please refer to Service Information B65 02 05.
Causes #2 through #5
B. If it is acting differently, follow these steps:
^ Check if the installed SDARS roof antenna (including the SDARS antenna cable) is defective by connecting an aftermarket SIRIUS antenna and
retest.
^ Check the connectors on the SDARS antenna (shark fin) and on the SDARS receiver.
^ If there is no problem found on the SDARS antenna including the SDARS antenna cable and connectors perform step C.
C. Perform diagnosis using ISTA (Integrated Service Technical Application), and troubleshoot any faults related to the SIRIUS/XM satellite radio
system.
[NEW] PARTS INFORMATION
  Page 100
  Page 101
[NEW] WARRANTY INFORMATION