2010 BMW M6 Convertible (E64) V10-5.0L (S85)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 12

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 13

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 14

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 15

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 16

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 17

2010 BMW M6 Convertible (E64) V10-5.0L (S85) Page 18

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW M3 Coupe (E92) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 14

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 15

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 16

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 17

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 18

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 19

2010 BMW M3 Coupe (E92) V8-4.0L (S65) Page 20

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 13

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 14

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 15

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 16

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 17

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 18

2010 BMW 550i Sedan (E60) V8-4.8L (N62TU) Page 19

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 750i (F01) V8-4.4L Turbo (N63)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 22

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 23

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 24

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 25

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 26

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 27

2010 BMW 750i (F01) V8-4.4L Turbo (N63) Page 28

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 128i Convertible (E88) L6-3.0L (N51) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 19

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 20

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 21

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 22

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 23

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 24

2010 BMW 128i Convertible (E88) L6-3.0L (N51) Page 25

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW M3 Sedan (E90) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 14

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 15

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 16

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 17

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 18

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 19

2010 BMW M3 Sedan (E90) V8-4.0L (S65) Page 20

B840311_Replacement_Telematics_Device_Spares_Activation.

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 15

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 16

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 17

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 18

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 19

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 20

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 21

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 22

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 23

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 24

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 25

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 26

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 27

2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 28

B840311_Replacement_Telematics_Device_Spares_Activation.

Not applicable 2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 11

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 12

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 13

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 14

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 15

2010 BMW 535xi Wagon AWD (E61) L6-3.0L Turbo (N54) Page 16

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW M5 (E60) V10-5.0L (S85)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW M5 (E60) V10-5.0L (S85) Page 12

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW M5 (E60) V10-5.0L (S85) Page 13

2010 BMW M5 (E60) V10-5.0L (S85) Page 14

2010 BMW M5 (E60) V10-5.0L (S85) Page 15

2010 BMW M5 (E60) V10-5.0L (S85) Page 16

2010 BMW M5 (E60) V10-5.0L (S85) Page 17

2010 BMW M5 (E60) V10-5.0L (S85) Page 18

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) DIAGNOSIS AND REPAIR, MAINTENANCE, DIAGNOSIS AND Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 15

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 16

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 17

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 18

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 19

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 20

2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 21

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 22

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 23

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 24

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 25

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 26

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 27

2010 BMW 750i xDrive AWD (F01) V8-4.4L Turbo (N63) Page 28

B840311_Replacement_Telematics_Device_Spares_Activation.

BMW 528i (E60) L6-3.0L (N52K) Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 528i (E60) L6-3.0L (N52K) Page 13

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 528i (E60) L6-3.0L (N52K) Page 14

2010 BMW 528i (E60) L6-3.0L (N52K) Page 15

2010 BMW 528i (E60) L6-3.0L (N52K) Page 16

2010 BMW 528i (E60) L6-3.0L (N52K) Page 17

2010 BMW 528i (E60) L6-3.0L (N52K) Page 18

2010 BMW 528i (E60) L6-3.0L (N52K) Page 19

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 19

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 20

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 21

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 22

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 23

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 24

2010 BMW 135i Convertible (E88) L6-3.0L Turbo (N54) Page 25

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW M3 Convertible (E93) V8-4.0L (S65) DIAGNOSIS AND REPAIR, MAINTENANCE,Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 11

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 12

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 13

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 14

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 15

2010 BMW M3 Convertible (E93) V8-4.0L (S65) Page 16

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 13

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 14

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 15

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 16

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 17

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 18

2010 BMW 650i Convertible (E64) V8-4.8L (N62TU) Page 19

B840311_Replacement_Telematics_Device_Spares_Activation.

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63)DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 840311 Date: 120901

BMW ASSIST(R) - Combox Repl. Part Activation via DCSnet

SI B84 03 11

Communication Systems

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 22

September 2012

Technical Service

This Service Information bulletin supersedes SI B84 03 11 dated September 2011.

[NEW] designates changes to this revision

SUBJECT

[NEW] Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist

MODEL

[NEW] All vehicles equipped with BMW Assist (639 or 6NL)

[NEW] INFORMATION

The following changes have taken place:

^ Introduction of the Peiker Acoustics TCB (Telematics Control Board) as the successor to the current Combox. The TCB is available in all 5 and 7

Series vehicles beginning with July 2012 production.

^ The application name has been changed from "Combox Activation" to "Telematics Device Spares Activation."

^ All Telematics control unit spares, including CDMA, can now be activated by Part managers via the DCSnet application. Service technicians no

longer need to contact the Telematics Analyst with activation requests. New MIN and MDN numbers needed for programming into CDMA units

will be made available in the Telematics Device Spares Activation application after the Parts managers have completed the activation process.

These numbers will be provided to the Service Technician by the Parts manager following activation.

[NEW] PROCEDURE

Please refer to the attachment for the updated instructions on Telematics control unit replacement parts activation via DCSnet.

NOTE:

As was the case in the original procedure, Telematics control unit replacement parts activation is still intended to be performed by Parts managers

only.

All Telematics control unit spares are to be activated by the Parts manager before release to the technician for installation in the vehicle.

[NEW] WARRANTY INFORMATION

Not applicable.

ATTACHMENTS

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 23

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 24

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 25

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 26

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 27

2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 28

B840311_Replacement_Telematics_Device_Spares_Activation.