Navigation System - Initialization Procedure
SI B 65 30 09
Audio, Navigation, Monitors, Alarms, SRS
April 2010
Technical Service
This Service Information bulletin supersedes SI B65 30 09 dated January 2010.
[NEW] designates changes to this revision
SUBJECT
[NEW] Enabling Code FSC/SWT - Enabling the Navigation System Map at QC1
MODEL
[NEW] All models produced from January 2010 on with option 609 (Navigation System Professional, CIC)
SITUATION
The navigation system is inoperative unless the map is enabled during the QC1 Pre-Delivery Check.
[NEW] INFORMATION
2010 BMW M5 (E60) V10-5.0L (S85) Page 337
New vehicles come equipped with a navigation road map (PREMIUM 2010) that must be enabled via an enabling code (FSC). This process is part
of the new QC1 Pre-Delivery Check performed with the ISID (ISTA Diagnosis).
IMPORTANT:
There is no programming involved!
[NEW] PROCEDURE
Enabling the navigation map at QC1 requires the use of an "INITIAL" enabling code.
Note:
In order to avoid unnecessary delays in the QC1 process, order this "INITIAL" enabling code at least 24 hours before performing QC1. This code is
valid for 30 days, after which it is automatically deleted. Unlike other enabling codes, these "INITIAL" codes are available free of charge from the
Parts department (nominal charge $.01). The part number for the "INITIAL" enabling code is published in the EPC. It must be ordered as a coded
part via the parts ordering process.
The delivery of the enabling code takes place in the After Sales Assistance Portal (ASAP).
Note:
If a BMW center has two dealer numbers, when retrieving the enabling code, be sure to use the same dealer number that your Parts department used
when the original order was placed.
Procedure for ordering and downloading the initial enabling code:
Refer to attachment A.
Procedure for activation of the navigation system map using ISTA:
Refer to attachment B.
For a general overview on the enabling code ordering and downloading process, refer to SI B09 04 09.
PARTS INFORMATION
WARRANTY INFORMATION
Since this process is part of the new QC1 Pre-Delivery Check, no additional warranty costs can be claimed.
ATTACHMENTS
2010 BMW M5 (E60) V10-5.0L (S85) Page 338
2010 BMW M5 (E60) V10-5.0L (S85) Page 339
view PDF attachment B653009_Attachment_A.
2010 BMW M5 (E60) V10-5.0L (S85) Page 340
view PDF attachment B653009_Attachment_B.
