2.0 In the lower part of the instrument panel (knee protector), beneath the instrument panel section for the heating and air-conditioning regulator,
car radio or PCM and center nozzle, mark a bore in accordance with the dimensions specified in Figures 5 and 6.
Dimension A = Center of instrument panel section (Figure 5).
Dimension B = 60 mm from lower edge of instrument panel (Figure 6).
2.1 Using an angle drill and an arbor-type cutter (Figure 7), drill a bore of 30 mm diameter in the intersection of the dimension lines.
2.2 With a socket wrench (a/f 13 mm), unscrew the fastening nut for the knee protector strip, which is now accessible through the bore
(Figure 8).
2.3 With a large screwdriver, move the knee protector strip away from the instrument panel support frame in the area of the center console
