2019 BMW 128i Convertible (E88) L6-3.0L (N51) A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts Page 217
Fault description
Control Module Self-Test, Torque Monitoring Current
Indicated Value Plausibility
Condition for fault identification
Test condition:
Throttle valve not without current
Driver torque demand is being exceeded
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
480 ms
Action in service
Check mass airflow system (vacuum leaks, VVT, VANOS,
throttle valve...)
If frequency is >=3 Replace DME
Fault effect and breakdown warning
Driver information
Warning light:
MIL OFF EML ON CC: Reduced power, engine
malfunction
RPM limited to 1300 rpm
Service instruction
none
2D67 - P0604 (DME)
2D67 - P0604
Information saved in
DME
Fault code
2D67 - P0604
Fault text
DME, internal fault: monitoring, processors
Fault description
Internal Control Module Random Access Memory (RAM)
Error
Condition for fault identification
Test condition:
Internal control-module fault, RAM processor fault
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
immediately
Action in service
Ensure that correct softare and data have been flashprogrammed;
repeat flash-programming as indicated. If
frequency > 3 Replace DME
Fault effect and breakdown warning
