2019 BMW 128i Convertible (E88) L6-3.0L (N51) A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts Page 193
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace PWG
Fault effect and breakdown warning
Driver information
Warning light:
CC status report: ???
EML ON restricted PW gradient and PW limit via rpm
Service instruction
none
2D1B - P2123 (DME)
2D1B - P2123
Information saved in
DME
Fault code
2D1B - P2123
Fault text
Accelerator pedal module, pedal-position sensor, signal 1
Fault description
Throttle/Pedal Position Sensor/Switch 'D' Circuit High
Condition for fault identification
Test condition:
Pedal-position sensor monitor
No fault code currently registered
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
0.02 sec.
Action in service
1) Perform electrical check on sensor wire and power-supply
wires
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace PWG
Fault effect and breakdown warning
Driver information
Warning light:
CC status report: Reduced engine power!
EML ON restricted PW gradient and PW limit via rpm
Service instruction
none
2D1C - P2127 (DME)
2D1C - P2127
Information saved in
DME
Fault code
2D1C - P2127
Fault text
Accelerator pedal module, pedal-position sensor, signal 2
