Sunday, 26 May 2019

2000 BMW 528i (E39) 2000 BMW 528i (E39) 2000 BMW 528i (E39) Technical Service Bulletin # 040298 Date: 980301


Electrical Repair Kit IV - Additional Connectors



Group 04



Tools and Equipment



Bulletin



04 02 98



Woodcliff Lake, NJ



March 1998



Product Engineering



393



SUBJECT:



Additional Connectors for Electrical Repair Kit IV



MODEL:



All



Situation:



Distribution of the following connectors will be through the Automatic Tool Shipment Program. Additional connectors may be purchased through



your PDC. All prices on this bulletin are introductory prices and are only valid during the Automatic Tool Shipment.



The following connectors are to be added to electrical connector kit IV P/N 90 88 6 619 020 (refer to SIB 04 18 92). There are no open bin locations



in kit IV. The connectors and repair kit 0 must be kept in their bags and stored in the top tray.



Black 2 pin socket without unlocking device - code 1



(example-injectors)



P/N 90 88 6 619 111



Price = $1.95 (Qty 3)



Black 2 pin socket with unlocking device - code 1



(example-oil pressure switch or speed sensor)



P/N 90 88 6 619 112



Price = $2.05 (Qty 3)



Black 2 pin socket with unlocking device - code 3



394



P/N 90 88 6 619 114



Price = $2.20 (Qty 3)



Gray 3 pin socket with unlocking device - code 1



P/N 90 88 6 619 115



Price = $2.45 (Qty 3)



Black 3 pin socket with unlocking device - code 1



P/N 90 88 6 619 116



Price = $2.20 (Qty 3)



Black 3 pin socket with unlocking device - code 2



P/N 90 88 6 619 117



Price = $2.30 (Qty 3)



395



Repair Kit O for SLK 2.8 ELA connectors



P/N 90 88 6 619 211



Price = $48.00



SLK = Sensor lamellar contact (thin flat seal)



ELA = Single conductor seal



Kit O consists of:



^ 10- prefabricated 0.5mm replacement wires



^ 10- prefabricated 1 .0mm replacement wires



^ 20- 0.5 mm butt connectors



^ 20- 1.0 mm butt connectors



^ 40- shrink tubing



^ 5- Welsh plugs



Connector "Code" Explanations



Coding slots ensure that only the correct connector can be inserted in a specified location.



Code I Connector



There is one coding slot and it is located in the middle.



396



Code II Connector



There are two coding slots and they are located on both sides.



Code III Connector



There is one coding slot and it is located to the side.