Sunday, 10 March 2019

2000 BMW 328i (E46) Technical Service Bulletin # 040199 Date: 990301

2000 BMW 328i (E46) Technical Service Bulletin # 040199 Date: 990301



Windshield - Replacement Tools



Group 04



Tools and Equipment



Bulletin Number



04 01 99



341



Woodcliff Lake, NJ



March 1999



Product Engineering



SUBJECT:



Windshield Replacement Tools



MODEL:



All



Situation:



Distribution of the following tools will be through the Automatic Tool Shipment Program. Additional tools may be purchased through your PDC.



Refer to Parts Information bulletin 01 01 95 for tool warranty details. All prices on this bulletin are introductory prices and are only valid during the



Automatic Tool Shipment.



Tool Information:



Windshield Mounting Blocks



P/N 90 88 6 513 130



Price $5.30



These special hard foam blocks (1 & 2) are used during windshield replacement to properly tension the windshield while the glue dries. The blocks



are designed to support but not damage the windshield. Refer to Repair Manual section 51 31 000.



Windshield Tape



P/N 99 00 0 001 501



Price= $9.95



342



The windshield tape (3) is used with windshield mounting blocks to install vehicle windshields. This special tape resists stretching and will not mar



the vehicles finish. Refer to Repair Manual section 51 31 000 for details.



Distribution of the following tool will not be through the Automatic Tool Shipment Program. Additional tools may be purchased through your PDC.



Refer to Parts Information bulletin 01 01 95 for tool warranty details. All prices on this bulletin are introductory prices and are only valid during the



Automatic Tool Shipment.



Windshield Lifting Device



P/N 88 88 6 513 010



Price= $262.00



This lifting device is used to R&R front. rear and side windows. Two lifting devices are included when ordered.



Centers who have previously ordered this windshield lifting device (88 88 6 513 010) may modify it to work on E39 sport wagon rear side windows.



The modification is necessary due to the angle of the glass. Modification is as follows:



1. Enlarge the fixing pin hole to approximately 15 mm on both sides of one suction cup. This procedure should be repeated on the second lifting