Monday, 10 December 2018

Not applicable 2010 BMW 760Li (F02) V12-6.0L Turbo (N74) DIAGNOSIS AND REPAIR, MAINTENANCE, Technical Service Bulletin # 512912 Date: 121001


Interior - Rattle Noise From Front Passenger Side Trim



SI B51 29 12



Body Equipment



October 2012



Technical Service



SUBJECT



Rattling Noise from the Front Passenger Side Trim



MODEL



F01



F02



F04



Produced from August 2008 to July 2012



SITUATION



A rattling or clattering noise may be heard from the front passengers side footwell area when driving on rough roads.



CAUSE



The front passengers footwell trim makes contact with the side cover of the instrument panel.



PROCEDURE



Confirm the rattling noise is coming from the footwell trim near the glove compartment bottom.



1. The area of concern is where the plastic pieces of the footwell trim make contact with the lower instrument panel trim.



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 17



2. Refer to ISTA Repair Instruction 51 45 1950, "Remove and refit or replace the lower right hand trim for the instrument panel."



3. Apply a felt strip (10 x 35 x 2 mm) to the lower instrument panel trim, as shown in yellow.



Note:



Make sure the felt is not visible to the customer, after the trim is reassembled.



4. When reinstalling the trim, check the gap between the glove compartment and footwell trim. If the gap is larger than 2 mm, proceed to the next



step.



2010 BMW 760Li (F02) V12-6.0L Turbo (N74) Page 18



5. Modify the footwell trim reinforcing rib (as shown) by shaving the plastic rib down far enough to achieve the proper trim gap. Use a sharp



knife to shorten the height of the rib, to allow the footwell trim to fit higher and reduce the gap. Reinstall the modified footwell trim panel and



check for proper fitment.