Collision Avoidance - Camera View Appears Upside Down
SI B 66 02 10
2010 BMW 750Li xDrive AWD (F02) V8-4.4L Turbo (N63) Page 228
Distance Systems, Cruise Control, Remote Control
January 2010
Technical Service
SUBJECT
Initialization of the Top View Camera
MODEL
F01, F02 (7 Series)
SITUATION
The display in the central information display (CID) for one or more of the three cameras used in the Top Rear Side View Camera (TRSVC) system
may appear upside down or simply not display any image.
No relevant fault codes are stored in the TRSVC module.
This situation typically occurs on new vehicles during the Pre-Delivery Inspection (PDI) or after the electrical system of the car has been worked on.
CAUSE
One or more of the cameras have lost initialization.
PROCEDURE
Initialize the TRSVC system via ISTA/D, using the following procedure:
^ Perform a Vehicle Test.
^ Select the Service Function tab.
^ Select Body/Panorama Camera and then Start Search.
^ Select the test plan AS6653_TRSVCFX-Calibration, all-around vision camera.
^ Select Display.
^ Start the test plan.
During the calibration procedure, the cameras will be initialized.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
Defect Code: 66 53 06 14 00
Labor Operation: Labor Allowance: Description
Refer to KSD Refer to KSD Initialize TRSVC
