Computer/Controls - Break Out Box Overlay Identification
SI B 12 47 06
Engine Electrical Systems
July 2010
Technical Service
This Service Information bulletin supersedes SI B12 47 06 dated November 2006.
[NEW] designates changes to this revision
SUBJECT
Break Out Box Overlay Identification
MODEL
E60 (5 Series) 525i, 530i with N52 and N52KP engine
E60 (5 Series) M5
E63 and E64 (6 Series) M6 Coupe and Convertible
2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 295
E70 X5 3.0 with N52 KP
E83 X3 3.0 with N52 KP
E85 Z4 2.5 and 3.0 with N52KP engine
E90, E91 and E92 (3 Series) All models
INFORMATION
[NEW] The three illustrations below will identify the seven sub connectors within the two DME main connectors. Using Illustration #1 will
determine the proper location of the sub connectors within the main connectors. Illustrations # 2 or # 3 (depending on the model) will identify the
sub connector locations on BMW Special Tool 61 2 420/422.
Special Tool 61 2 420/422, Break Out Box overlays, are used in conjunction with adaptor cable 12 7 420/421, 612 420/421 and break out box 61 4
380/381. These special tools are utilized on all vehicles equipped with the following DME variants and the models described above:
^ MSS65
^ MSV70
^ MSD80
^ MSV80
^ MSD81
^ [NEW] MSS60 (E9x M3)
2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 296
2010 BMW 328Cic Convertible (E93) L6-3.0L (N52K) Page 297
