Technical Service Bulletin # 631010
Lighting Adaptive Headlight DTC 800FC6
SI B63 10 10
Lights
October 2010
Technical Service
This Service Information bulletin supersedes SI B63 10 10 dated July 2010.
[NEW] designates changes to this revision
SUBJECT
Date: 1010012010 BMW 750Li (F02) V84.4L Turbo (N63)
Page 385
CC Message: Adaptive Headlights
MODEL
F07 (5 Series)
F01, F02, F04 (7 Series)
Vehicles produced up to February 28, 2010
SITUATION
[NEW] A Check Control (CC) message is displayed for the adaptive headlights. The headlamps no longer turn with steering wheel
movement. Fault code 800FC6 is entered in the Footwell Module (FRM3).
CAUSE
A second turn signal request is made at the exact moment when the steering wheel is automatically cancelling from a previous turn
signal request.
The sequence of events is as follows:
^ The turn signal is indicated in one direction.
^ The vehicle makes the turn.
^ As the steering wheel begins to straighten, the turn signal is cancelled automatically.
^ At the exact moment the turn signal is cancelling, the turn signal is indicated in the opposite direction.
^ Intermittently the CC message is displayed.
CORRECTION
[NEW] Program the vehicle using ISTA/P 2.39.0 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to Centernet / Aftersales Portal / Service / Workshop Technology /
Vehicle Programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
Lighting Adaptive Headlight DTC 800FC6
SI B63 10 10
Lights
October 2010
Technical Service
This Service Information bulletin supersedes SI B63 10 10 dated July 2010.
[NEW] designates changes to this revision
SUBJECT
Date: 1010012010 BMW 750Li (F02) V84.4L Turbo (N63)
Page 385
CC Message: Adaptive Headlights
MODEL
F07 (5 Series)
F01, F02, F04 (7 Series)
Vehicles produced up to February 28, 2010
SITUATION
[NEW] A Check Control (CC) message is displayed for the adaptive headlights. The headlamps no longer turn with steering wheel
movement. Fault code 800FC6 is entered in the Footwell Module (FRM3).
CAUSE
A second turn signal request is made at the exact moment when the steering wheel is automatically cancelling from a previous turn
signal request.
The sequence of events is as follows:
^ The turn signal is indicated in one direction.
^ The vehicle makes the turn.
^ As the steering wheel begins to straighten, the turn signal is cancelled automatically.
^ At the exact moment the turn signal is cancelling, the turn signal is indicated in the opposite direction.
^ Intermittently the CC message is displayed.
CORRECTION
[NEW] Program the vehicle using ISTA/P 2.39.0 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to Centernet / Aftersales Portal / Service / Workshop Technology /
Vehicle Programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
