BMW X6 (E71) V8-4.4L Turbo (N63) Technical Service Bulletin # 610611 Computers/Controls - JBE Fails Programming SI B61 06 11 General Electrical Systems

BMW X6 (E71) V8-4.4L Turbo (N63) Technical Service Bulletin # 610611
Computers/Controls - JBE Fails Programming
SI B61 06 11
General Electrical Systems
September 2011
Date: 1109012010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 118
Technical Service
SUBJECT
JBE Fails Programming and Terminal 15 Not Recognized at ICOM
MODEL
E82, E88 (1 Series)
E90, E91, E92, E93 (3 Series)
E70 (X5)
E71 (X6)
E72 (ActiveHybrid X6)
SITUATION
During a software update of the vehicle (as part of another repair situation), the JBE (Junction Box Electronics) module fails programming. Terminal
15 is then no longer recognized at the ICOM (Integrated Communication Optical Module).
Note:
Terminal 15 does function properly in the vehicle, but both ISTA (Integrated Service Technical Application) and ISTA/P (Integrated Service
Technical Application / Programming) do not recognize Terminal 15 as being on.
CAUSE
Software error
CORRECTION
Follow the procedure to perform the specific "additional work," as outlined in the attachment to this Service Information, for "Reanimation of the
JBE" with ISTA/P 2.43.0 or later.
WARRANTY INFORMATION
ATTACHMENTS2010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 1192010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 1202010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 1212010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 1222010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 1232010 BMW X6 (E71) V8-4.4L Turbo (N63)
 
  BMW X6 (E71) V8-4.4L Turbo (N63)
Page 124
B610611 Procedure