Collision Avoidance - Check Control Mssg. 'Front Camera Failed' SI B66 05 12 Distance Systems, Cruise Control, Remote Control

2013 BMW 328i xDrive Sedan AWD (F30) L4-2.0L Turbo (N20) Copyright ? 2013, ALLDATA 10.52SS Page 1 Vehicle: All Technical Service Bulletins Collision Avoidance - Check Control Mssg. 'Front Camera Failed' SI B66 05 12 Distance Systems, Cruise Control, Remote Control September 2012 Technical Service SUBJECT KAFAS: CCM Stating "Front Camera Failed" MODEL F01 F02 F06 F07 F10 F12 F13 F30 Vehicles affected: ^ With option 5AD Lane Departure Warning (LDW) and/or ^ 8TH Speed Limit Information (SLI) ^ Production date to August 1, 2012 SITUATION A check control message (CCM) stating that the "KAFAS (Camera Assisted Driver Assistance System): Front camera failed" is displayed on the Central Information Display (CID). Fault code 0x800ABD is stored in memory in the KAFAS. CAUSE A software error in the KAFAS control unit PROCEDURE 1. Perform a vehicle test using ISTA and complete all test plans linked to the fault code 0x800ABD. Note: When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery voltage reading in the repair order comments section. 2. Retest the functionality. If the issue is resolved after performing step 1 above, then no further diagnostic steps are required. 3. If the issue is not resolved after completion of step 1 above, proceed as follows: a. For vehicles produced to January 4, 2012, the KAFAS control unit must be replaced and the vehicle programmed and coded with ISTA/P 2.47.5 or higher. b. For vehicles produced from January 4, 2012, do not replace the KAFAS control unit. Only program and code the vehicle with ISTA/P 2.47.5 or higher. NOTE: ISTA/P 2.47.5 is scheduled for release in September 2012. 4. Retest the KAFAS functionality PARTS INFORMATION 2013 BMW 328i xDrive Sedan AWD (F30) L4-2.0L Turbo (N20) Copyright ? 2013, ALLDATA 10.52SS Page 2 WARRANTY INFORMATION