Code Definition: P0304 - Cylinder 4 Misfire Detected
The P0304 code is a specific trouble code that indicates a misfire has been detected in cylinder 4 of the engine. This code is usually accompanied by a check engine light and can be caused by a variety of issues.
Possible Causes:
- Faulty spark plug or ignition coil in cylinder 4
- Worn or damaged valve guides or seats in cylinder 4
- Low compression in cylinder 4
- Fuel injection system problems
- Clogged or dirty fuel injectors
- Faulty oxygen sensors
- Ignition system problems
- Engine mechanical problems
Symptoms:
- Check engine light illuminated
- Misfire or rough engine idle
- Reduced power and performance
- Difficulty starting the engine
- Stalling
- Increased emissions
Diagnostic Procedure:
- Scan the vehicle for any other codes that may be present. If there are no other codes, proceed to step 2.
- Check the spark plug and ignition coil in cylinder 4 for signs of wear or damage. Use a spark tester to check for proper spark output. If the spark plug or ignition coil is faulty, replace it.
- Use a compression gauge to check the compression in cylinder 4. If the compression is low, suspect worn or damaged valve guides or seats.
- Check the fuel injection system for any leaks or blockages. Use a fuel pressure gauge to check the fuel pressure. If the fuel pressure is low, suspect a faulty fuel pump or clogged fuel filter.
- Inspect the fuel injectors for signs of clogging or damage. Use a cleaning solution to clean out any clogs or debris. If the injectors are damaged, replace them.
- Check the oxygen sensors for signs of damage or fouling. If the oxygen sensors are faulty, replace them.
- Check the ignition system for any problems, such as worn or damaged spark plug wires or ignition modules.
- If none of the above steps resolve the issue, suspect an engine mechanical problem and consult a professional mechanic for further diagnosis.
Repair Information:
- Replace the faulty spark plug or ignition coil in cylinder 4. Be sure to use the correct replacement part number for your specific vehicle make and model.
- Replace the fuel filter if necessary.
- If the fuel pump is malfunctioning, replace it with a new one.
- Clean or replace the fuel injectors as needed.
- Replace the oxygen sensors if they are faulty.
- Repair or replace any damaged ignition components.
- If the issue persists, consider replacing the engine or consulting a professional mechanic for further repair.