BMW X5 M (E70) V8-4.4L Turbo (S63) Technical Service Bulletin # 660610 Date: 101001
Collision Avoidance - Top Rearview Control Unit Function
SI B66 06 10
Distance Systems, Cruise Control, Remote Control
October 2010
Technical Service
This Service Information bulletin supersedes SI B66 06 10 dated September 2010.
[NEW] designates changes to this revision
SUBJECT
Top Rear View Control Unit Functions Intermittently
MODEL
E70 (X5)
E71, E72 (X6)
Vehicles produced from 9/30/09 up to 9/29/10
SITUATION
The top rear view control unit (TRSVC) functions intermittently. After deleting the fault memory in the TRSVC control unit, there is a possibility
that the original fault entries may reappear in the control unit after the next restart. This may occur with every fault stored in the TRSVC control unit.
CAUSE
Software fault in the TRSVC control unit.
PROCEDURE
Do not replace any parts!
^ [NEW] Program and code the vehicle using ISTA/P 2.39.0 or higher.
^ [NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
^ [NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology /
Vehicle Programming.
BMW X5 M (E70) V8-4.4L Turbo (S63) Page 508
WARRANTY INFORMATION
Collision Avoidance - Top Rearview Control Unit Function
SI B66 06 10
Distance Systems, Cruise Control, Remote Control
October 2010
Technical Service
This Service Information bulletin supersedes SI B66 06 10 dated September 2010.
[NEW] designates changes to this revision
SUBJECT
Top Rear View Control Unit Functions Intermittently
MODEL
E70 (X5)
E71, E72 (X6)
Vehicles produced from 9/30/09 up to 9/29/10
SITUATION
The top rear view control unit (TRSVC) functions intermittently. After deleting the fault memory in the TRSVC control unit, there is a possibility
that the original fault entries may reappear in the control unit after the next restart. This may occur with every fault stored in the TRSVC control unit.
CAUSE
Software fault in the TRSVC control unit.
PROCEDURE
Do not replace any parts!
^ [NEW] Program and code the vehicle using ISTA/P 2.39.0 or higher.
^ [NEW] Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
^ [NEW] For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology /
Vehicle Programming.
BMW X5 M (E70) V8-4.4L Turbo (S63) Page 508
WARRANTY INFORMATION