BMW X5 M (E70) V8-4.4L Turbo (S63) Technical Service Bulletin # 610510 Date: 100401
Computer/Control - 'Increased Batt. Discharge' Displayed
SI B 61 05 10
General Electrical Systems
April 2010
Technical Service
SUBJECT
Check Control Message "Increased Battery Discharge" Appears Upon Startup
MODEL
E70 (X5)
E71 (X6)
Vehicles produced up to April 1, 2010 that have an integration level earlier than E070-10-3-501
SITUATION
The check control message "Increased Battery Discharge" appears in the instrument cluster and CID (Central Information Display) when the vehicle
is started.
DME (Digital Motor Electronics) fault code "2DED" is stored, indicating "closed circuit current violation".
CAUSE
Power management software error
Closed circuit current problem of 80 - 200 mA is indicated even though no problem exists.
PROCEDURE
1. Using the latest version of ISTA (Integrated Service Technical Application), perform the energy diagnosis test plan. The test plan will be
automatically called up, based on the DME fault code "2DED". Complete the entire test plan and record the DIAGCODE.
BMW X5 M (E70) V8-4.4L Turbo (S63) Page 430
2. If "Closed circuit current infringement" is listed as the most likely cause in the test plan results, proceed to the next step. If other possible causes
of the fault are listed, diagnose them accordingly.
3. If closed circuit current problems are noted between 80 - 200 mA, program the vehicle using ISTA/P 2.37.0 or later to integration level
E70-10-3-501 or higher. If the integration level of the vehicle is already at E070-10-3-501 or later, or the closed circuit current results listed are not
between 80 - 200 mA, troubleshoot the problem as per SI B61 05 09 and B61 08 00.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to Centernet/Aftersales Portal /Service / Workshop Technology / Vehicle
Programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
Computer/Control - 'Increased Batt. Discharge' Displayed
SI B 61 05 10
General Electrical Systems
April 2010
Technical Service
SUBJECT
Check Control Message "Increased Battery Discharge" Appears Upon Startup
MODEL
E70 (X5)
E71 (X6)
Vehicles produced up to April 1, 2010 that have an integration level earlier than E070-10-3-501
SITUATION
The check control message "Increased Battery Discharge" appears in the instrument cluster and CID (Central Information Display) when the vehicle
is started.
DME (Digital Motor Electronics) fault code "2DED" is stored, indicating "closed circuit current violation".
CAUSE
Power management software error
Closed circuit current problem of 80 - 200 mA is indicated even though no problem exists.
PROCEDURE
1. Using the latest version of ISTA (Integrated Service Technical Application), perform the energy diagnosis test plan. The test plan will be
automatically called up, based on the DME fault code "2DED". Complete the entire test plan and record the DIAGCODE.
BMW X5 M (E70) V8-4.4L Turbo (S63) Page 430
2. If "Closed circuit current infringement" is listed as the most likely cause in the test plan results, proceed to the next step. If other possible causes
of the fault are listed, diagnose them accordingly.
3. If closed circuit current problems are noted between 80 - 200 mA, program the vehicle using ISTA/P 2.37.0 or later to integration level
E70-10-3-501 or higher. If the integration level of the vehicle is already at E070-10-3-501 or later, or the closed circuit current results listed are not
between 80 - 200 mA, troubleshoot the problem as per SI B61 05 09 and B61 08 00.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to Centernet/Aftersales Portal /Service / Workshop Technology / Vehicle
Programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
